: FRONT & REAR CV AXLE DRIVE SHAFT, COMPATIBLE WITH POLARIS OEM 1332947,1333589,1333756,1334175
Weight: 6.35 kg
PART NUMBER: 1334175
: This part fits the following Polaris models:
2013-2018 Polaris 900 Ranger XP Non HL
2015-2016 Polaris 900 Ranger XP HL
2017 Polaris 900 Sportsman ACE
2017 Polaris 900D RGR
2017-2019 Polaris 1000 Ranger XP Non HL *For 2019 XP only MFG Before 07/01/18*
2017 Polaris 1000 Ranger XP HL
2015-2016 Polaris Ranger Diese
2015-2016 Ranger 570 Full Size Crew 570-6
2017 Polaris 570 RZR S
2018-2019 Polaris 900 ACE XC
|Warranty:||1 Month~1 Year Depends on Different Goods|
|Transport Package:||Wooden Case|
What Factors Should Be Considered When Selecting the Right Rear Drive Shaft for a Vehicle?
When selecting the right rear drive shaft for a vehicle, several factors need to be considered to ensure optimal performance, durability, and safety. Here’s a detailed explanation of the key factors that should be taken into account:
1. Vehicle Specifications:
The specific characteristics of the vehicle play a significant role in determining the appropriate rear drive shaft. Factors such as the vehicle’s weight, horsepower, torque output, wheelbase, suspension design, and intended use (e.g., off-roading, towing, performance driving) need to be considered. These specifications help determine the required torque capacity, length, diameter, and material strength of the drive shaft to handle the vehicle’s demands effectively.
2. Drivetrain Configuration:
The drivetrain configuration of the vehicle influences the selection of the rear drive shaft. Vehicles with rear-wheel drive (RWD), four-wheel drive (4WD), or all-wheel drive (AWD) systems have different drivetrain layouts and torque distribution requirements. The drive shaft must be compatible with the vehicle’s drivetrain configuration, including the type of differential, transfer case, and front-wheel drive components, if applicable.
3. Torque and Power Requirements:
The torque and power output of the vehicle’s engine or transmission impact the selection of the rear drive shaft. Higher torque and power levels necessitate a stronger and more robust drive shaft to handle the increased load. It is important to consider the maximum torque and power values of the vehicle and select a drive shaft that can safely and reliably transmit the power without exceeding its rated capacity.
4. Material Selection:
The choice of materials for the rear drive shaft is crucial in ensuring its strength, durability, and weight. Common materials used for drive shafts include steel and aluminum. Steel drive shafts offer high strength and are typically used in heavy-duty applications, while aluminum drive shafts are lighter and can provide weight savings, making them suitable for performance-oriented vehicles. The material selection should also consider factors such as corrosion resistance, cost, and manufacturing feasibility.
5. Length and Diameter:
The length and diameter of the rear drive shaft are critical considerations to prevent issues such as vibration, bending, or excessive deflection. The length of the drive shaft depends on the vehicle’s wheelbase and the distance between the transmission or transfer case and the rear differential. The diameter of the drive shaft is determined by the torque and power requirements, as well as the material properties. Proper sizing ensures the drive shaft can handle the forces and maintain optimal power transmission without compromising safety or performance.
6. Suspension and Drivetrain Movements:
The suspension system and drivetrain movements of the vehicle need to be taken into account when selecting a rear drive shaft. The drive shaft must accommodate the range of motion and articulation of the suspension, as well as the angular movements and changes in alignment between the transmission, differential, and rear wheels. Flexible joints such as universal joints (u-joints) or constant velocity (CV) joints are typically used to allow for these movements while maintaining torque transmission.
7. Environmental Factors:
The environmental conditions in which the vehicle will operate should be considered when selecting a rear drive shaft. Factors such as temperature extremes, exposure to moisture, off-road terrain, and corrosive substances can impact the choice of materials, protective coatings, and maintenance requirements of the drive shaft. It is essential to select a drive shaft that can withstand the environmental conditions and maintain its performance and longevity.
8. Manufacturer Quality and Compatibility:
When choosing a rear drive shaft, it is important to consider the reputation and quality of the manufacturer. Selecting a drive shaft from a reputable and experienced manufacturer ensures that the product meets industry standards, undergoes thorough quality control, and is compatible with the vehicle’s specifications and requirements. It is advisable to consult with automotive professionals or refer to manufacturer guidelines to ensure proper selection and compatibility.
In summary, selecting the right rear drive shaft for a vehicle involves considering factors such as vehicle specifications, drivetrain configuration, torque and power requirements, material selection, length and diameter, suspension and drivetrain movements, environmental factors, and manufacturer quality. Taking these factors into account helps ensure that the chosen rear drive shaft is suitable for the vehicle’s needs and provides reliable and efficient power transmission.
How Do Rear Drive Shafts Enhance the Traction and Stability of Off-Road Vehicles?
Rear drive shafts play a crucial role in enhancing the traction and stability of off-road vehicles. Off-road driving presents unique challenges, such as uneven terrain, steep inclines, loose surfaces, and obstacles, where maintaining traction and stability is vital. Here’s a detailed explanation of how rear drive shafts contribute to enhancing the traction and stability of off-road vehicles:
1. Power Distribution:
Rear drive shafts are responsible for transmitting torque from the transfer case or transmission to the rear differential or rear axle in off-road vehicles. This power distribution allows the rear wheels to receive torque and apply it to the ground, enhancing traction. By providing power to the rear wheels, the rear drive shafts ensure that the wheels dig into the terrain, maximizing grip and reducing the chances of wheel spin. This power distribution contributes to maintaining forward momentum and preventing loss of traction in challenging off-road conditions.
2. Rear-Wheel Traction:
Rear drive shafts enable rear-wheel traction, which is crucial for off-road vehicles. When traversing uneven or slippery terrain, the weight of the vehicle shifts to the rear wheels during acceleration. The rear drive shafts deliver torque to the rear wheels, allowing them to maintain traction and effectively propel the vehicle forward. By ensuring rear-wheel traction, the drive shafts help the off-road vehicle overcome obstacles, climb steep inclines, and navigate challenging off-road terrains where maintaining grip is essential.
3. Weight Transfer:
Rear drive shafts contribute to proper weight transfer during off-road driving. As the vehicle encounters obstacles or uneven terrain, weight transfer occurs, with the weight shifting from one wheel to another. The rear drive shafts aid in balancing the weight distribution, preventing excessive weight transfer to a single wheel. This balanced weight transfer improves stability and minimizes the chances of wheel lift or loss of control. It allows the off-road vehicle to maintain stability and traction, enhancing overall safety and performance.
4. Axle Articulation:
Off-road vehicles often require significant axle articulation to maintain contact between the wheels and the ground, especially when navigating rough terrain. Rear drive shafts accommodate the movement and flexing of the suspension system, allowing the rear wheels to articulate independently. This flexibility enables the wheels to maintain contact with the ground, even when encountering large obstacles or uneven surfaces. By adapting to the changing terrain, the rear drive shafts contribute to improved traction and stability, ensuring the off-road vehicle can maintain forward momentum.
5. Torque Control:
Rear drive shafts play a role in torque control, which is essential for maintaining traction and stability off-road. Some off-road vehicles feature differential locks or limited-slip differentials in the rear axle. The rear drive shafts transmit torque to these differentials, allowing for better power distribution between the rear wheels. This torque control helps prevent wheelspin and ensures that power is delivered to the wheels with traction, enhancing overall traction and stability in challenging off-road conditions.
6. Ground Clearance:
Rear drive shafts contribute to improving ground clearance in off-road vehicles. The design and positioning of the drive shafts allow for higher ground clearance compared to vehicles with front-wheel drive configurations. Increased ground clearance reduces the risk of the drive shafts scraping or getting damaged by obstacles, rocks, or uneven surfaces. By providing adequate ground clearance, the rear drive shafts enable the off-road vehicle to navigate rough terrain without hindrance, maintaining traction and stability.
7. Durability and Reliability:
Rear drive shafts in off-road vehicles are designed to withstand the demanding conditions encountered during off-road driving. They are built to be robust and durable, capable of withstanding impacts, vibrations, and extreme articulation. The reliability and strength of the rear drive shafts contribute to maintaining traction and stability by ensuring that the power transmission remains intact, even in challenging off-road situations.
In summary, rear drive shafts enhance the traction and stability of off-road vehicles through power distribution, rear-wheel traction, weight transfer management, axle articulation accommodation, torque control, increased ground clearance, and durability. These factors collectively contribute to maintaining traction, allowing the off-road vehicle to overcome obstacles, navigate challenging terrains, and ensure stability and control in off-road driving conditions.
How Do Rear Drive Shafts Handle Variations in Torque, Speed, and Alignment?
Rear drive shafts are designed to handle variations in torque, speed, and alignment within a vehicle’s drivetrain. They play a crucial role in transmitting power from the engine or transmission to the rear wheels while accommodating the dynamic forces and movements encountered during operation. Here’s a detailed explanation of how rear drive shafts handle variations in torque, speed, and alignment:
Variations in Torque:
Rear drive shafts are engineered to withstand and transmit varying levels of torque generated by the engine. Torque variations occur during acceleration, deceleration, and changes in load. To handle these variations, rear drive shafts are typically constructed with high-strength materials such as steel or aluminum to provide the necessary strength and rigidity. The diameter, wall thickness, and design of the drive shaft are carefully calculated to ensure torque capacity and reliability. Additionally, universal joints (u-joints) or constant velocity (CV) joints are incorporated into the drive shaft assembly to allow for rotational movement and accommodate changes in angles and torque loads.
Variations in Speed:
Rear drive shafts are designed to adapt to variations in rotational speed between the engine or transmission and the rear wheels. As the vehicle accelerates or decelerates, the rotational speed of the drive shaft changes. To handle these variations, the length and design of the rear drive shaft are carefully calculated to minimize vibrations and maintain smooth power delivery. The drive shaft may incorporate features such as balancing weights or dampers to reduce or eliminate vibrations caused by speed fluctuations. Additionally, the use of u-joints or CV joints allows for angular movement and accommodates speed differentials between the two ends of the drive shaft.
Variations in Alignment:
Rear drive shafts must also accommodate variations in alignment caused by suspension movement, chassis flex, and drivetrain articulation. As the suspension compresses or extends, the drivetrain components can shift in relation to each other, causing changes in the alignment of the rear drive shaft. To handle these variations, rear drive shafts incorporate flexible components such as u-joints or CV joints. These joints allow for angular movement and articulation, accommodating changes in the relative positions of the transmission, differential, and rear wheels. The use of flexible couplings or slip yokes at each end of the drive shaft also helps to compensate for alignment changes and prevent binding or excessive stress on the drive shaft components.
Vibration and Harmonic Damping:
Vibrations and harmonic forces can be generated within the drivetrain, especially at higher speeds. Rear drive shafts are designed to mitigate these vibrations and dampen harmonic forces to ensure a smooth and balanced ride. Various techniques are employed to achieve this, including the use of properly balanced drive shafts, vibration-absorbing materials, and damping devices such as rubber or elastomer dampers. These measures help reduce the transmission of vibrations and harmonics throughout the drivetrain, enhancing the overall comfort, stability, and longevity of the rear drive shaft.
In summary, rear drive shafts are engineered to handle variations in torque, speed, and alignment within a vehicle’s drivetrain. They are constructed with high-strength materials, incorporate flexible joints, and employ techniques to dampen vibrations and harmonics. By accommodating these variations, rear drive shafts ensure efficient power transmission, smooth operation, and reliable performance in various driving conditions.
editor by CX 2023-09-30