Rear Left Right CV Drive Joint Axle Shaft Assembly Replacement for 2003-2005 Honda Rincon 650 & 2006-2007 Honda Rincon 680
1. Outer Race: CF53/55#
2. Cage & Inner Race & Three-pin Rack: 20Cr
3. Driver Shaft: 40Cr
4. Balls: Bearing Steel GCr15
5. Inner Joint Bolts: 45#
6. Rubber Boot: Neoprene-Nitrile or customers required
7. Grease: Molybdenum Disulfide or customers required
8. Packing: Neutral box, CHINAMFG box, or customers’ design
- Replacement for 2003 Honda Rincon 650 TRX650FGA 4×4 GPScape
- Replacement for 2004 Honda Rincon 680 TRX680FGA 4×4 GPScape
- Replacement for 2005 Honda Rincon 650 TRX650FA 4×4
- Replacement for 2006 Honda Rincon 680 TRX680FGA 4×4 GPScape
- Replacement for 2006 Honda Rincon 680 TRX680FA 4×4
- Replacement for 2007 Honda Rincon 650 TRX650FA 4×4
- Replacement for 2007 Honda Rincon 680 TRX680FA 4×4
- Replacement for 2008 Honda Rincon 680 TRX680FGA 4×4 GPScape
- Replacement for 2008 Honda Rincon 680 TRX680FA 4×4
- Replacement for 2009 Honda Rincon 680 TRX680FGA 4×4 GPScape
- Replacement for 2009 Honda Rincon 680 TRX680FA 4×4
- Replacement for 2571 Honda Rincon 680 TRX680FA 4×4
- Replacement for 2011 Honda Rincon 680 TRX680FA 4×4
- Replacement for 2012 Honda Rincon 680 TRX680FA 4×4
- Replacement for 2013 Honda Rincon 680 TRX680FA 4×4
- Replacement for 2014 Honda Rincon 650 TRX650FGA 4×4 GPScape
- Replacement for 2015 Honda Rincon 680 TRX680FA
- Replacement for 2015 Honda Rincon 680 TRX680FA 4×4
- Replacement for 2016 Honda Rincon 680 TRX680FA Camo
- Replacement for 2017 Honda Rincon 680 TRX680FA
- Replacement for 2018 Honda Rincon 650 TRX650FA 4×4
- Neoprene boots ensure excellent CHINAMFG resistance, which eliminates cracking, a leading cause of boot failure.
- Boot clamps are pneumatically crimped creating a perfect seal between the boot and housing.
- High quality grease withstands high-temperature and pressure extremes, which extends joint life.
- CV Axles are measured after assembly to ensure proper fit.
- CV Axles are engineered to provide OE fit, form, and function – premium materials, coupled with precise machining and balancing, ensure smooth, vibration free performance in all driving conditions
- Since boot failure is the main cause of CV axle failure, our axles use only premium grade neoprene boots that ensure robust abrasion and extreme temperature resistance, preserving boot integrity
- Assembled with a specially formulated, high-temperature Moly grease that resists friction and wear, contributing to a lifetime of smooth, dependable performance
- All axles are thoroughly inspected for quality and workmanship, and because we believe in the exceptional quality of our components, every axle comes with a limited lifetime warranty
Hot Selling CV AXLE SHAFT (Contact us: email@example.com)
ZheJiang Mighty Machinery Co. Ltd is a professional manufacturer of auto bearings for more than 20 years. We provide a one-stop service for our customers. Our main products include wheel bearings & hub assembly, belt tensioners, clutch release bearings, and other parts.
Relying on the professional and rich manufacturing experience and many substantial factories which stable cooperated for many years, Mighty suppliers customers high-quality products at very competitive prices.
Customer satisfaction is our First Priority, We adhere to the concept of ” Quality First, Customer First”. We will continue to provide high-quality products and the best services to our customers and build up CHINAMFG long-time friendship partners.
More than 20 years of manufacturing and exporting experience
OEM manufacturing available
Full range, large stock
One year warranty
Packaging & Shipping
1. What’s the minimum order quantity?
We don’t have the minimum order quantity. We can also provide free samples, but you need to pay the freight.
2. Do you provide ODM&OEM order service?
Yes, we provide ODM&OEM services to customers around the world, and we can customize different brands and different sizes of packaging boxes according to customers’ requirements.
3. After-sales service and warranty time
We guarantee that our products will be free from defects in materials and workmanship within 12 months from the date of delivery. The warranty is void due to improper use, incorrect installation, and physical damage.
4. How to place an order?
Send us an email of the models, brand, quantity, consignee information, model of transportation, and payment
Confirm payment and arrange the production.
5. What are your packing conditions?
We use standardized export packaging and environmental protection packaging materials. If you have a legally registered patent, we will package the goods in your brand box after receiving your authorization
6. What are your payment terms?
T/T is 30% of the payment in advance and 70% balance before delivery. Before you pay the balance, we will show you photos or videos of the products and packaging.
7. How long is your delivery time?
The delivery time of the sample order is 3-5 days, and that of a batch order is 5-45 days. The exact delivery time depends on the item and the quantity you ordered.
8. Do you test all products before delivery?
Yes, according to ISO standards, we have professional Q/C personnel, precision testing instruments, and an internal inspection system. We control the quality of every process from material receiving to packaging to ensure that you receive high-quality products
|After-sales Service:||12 Months|
How Do Manufacturers Ensure the Compatibility and Quality of Rear Drive Shafts?
Manufacturers employ several measures to ensure the compatibility and quality of rear drive shafts, which are crucial components in a vehicle’s drivetrain system. These measures involve rigorous design, testing, and production processes to meet industry standards and ensure reliable performance. Here’s a detailed explanation of how manufacturers ensure the compatibility and quality of rear drive shafts:
1. Design Specifications and Standards:
Manufacturers follow specific design specifications and standards when developing rear drive shafts. These specifications include parameters such as length, diameter, material selection, torque capacity, and operating conditions. Design guidelines provided by industry organizations, government regulations, and vehicle manufacturers play a crucial role in ensuring compatibility and performance. Adhering to these specifications helps manufacturers produce rear drive shafts that meet the requirements of various vehicle models and drivetrain configurations.
2. Computer-Aided Design (CAD) and Simulation:
Manufacturers use computer-aided design (CAD) software and simulation tools to create virtual models of rear drive shafts. CAD enables precise modeling of shaft geometry, joint types, and connection points. Simulation tools allow manufacturers to analyze the structural integrity, stress distribution, and performance characteristics of the drive shaft under different operating conditions. By simulating and optimizing the design virtually, manufacturers can identify potential issues, ensure compatibility, and optimize the performance of rear drive shafts before physical prototyping and production.
3. Material Selection and Quality Control:
Manufacturers carefully select materials for rear drive shafts to ensure compatibility and durability. High-strength alloys, such as steel or aluminum, are commonly used due to their excellent mechanical properties. The material selection process involves considering factors such as strength, weight, fatigue resistance, and corrosion resistance. Manufacturers also implement strict quality control measures to verify the quality and integrity of the materials used. This includes conducting material testing, such as mechanical testing and metallurgical analysis, to ensure that the selected materials meet the required specifications and performance standards.
4. Prototype Development and Testing:
Manufacturers develop physical prototypes of rear drive shafts for testing and validation purposes. Prototypes are manufactured using the finalized design and materials. They undergo a series of tests to evaluate their performance, including static and dynamic load testing, torsional strength testing, and fatigue testing. These tests help manufacturers assess the compatibility, strength, and durability of the rear drive shafts. By analyzing the test results, manufacturers can identify any design flaws, optimize the performance, and ensure that the drive shafts meet the required performance standards and safety regulations.
5. Manufacturing Processes and Quality Assurance:
Manufacturers employ precise manufacturing processes to ensure the quality and compatibility of rear drive shafts. Advanced machining techniques, such as CNC (Computer Numerical Control) machining, are used to achieve accurate dimensions and tolerances. Welding, heat treatment, and balancing processes are performed to enhance strength, structural integrity, and rotational balance. Quality assurance protocols are implemented throughout the manufacturing process to monitor and control the quality of each component and assembly stage. This includes inspections, dimensional checks, and non-destructive testing methods, such as ultrasonic testing or magnetic particle inspection, to detect any defects or inconsistencies.
6. Compliance with Standards and Certifications:
Manufacturers ensure that rear drive shafts comply with industry standards and certifications. These standards may include ISO (International Organization for Standardization) standards, SAE (Society of Automotive Engineers) standards, or specific vehicle manufacturers’ specifications. Compliance with these standards ensures that the rear drive shafts meet the required performance, safety, and compatibility criteria. Manufacturers undergo audits and certifications to demonstrate their adherence to these standards, providing assurance to customers and end-users about the quality and compatibility of their rear drive shafts.
7. Continuous Improvement and Customer Feedback:
Manufacturers strive for continuous improvement in the design, production, and quality of rear drive shafts. They actively seek feedback from customers, vehicle manufacturers, and industry experts to identify areas for improvement. This feedback helps manufacturers address compatibility issues, optimize performance, and incorporate new technologies and materials into their rear drive shafts. By continuously refining their processes and products, manufacturers ensure that rear drive shafts remain compatible with evolving vehicle technologies and meet the changing needs of the automotive industry.
In summary, manufacturers ensure the compatibility and quality of rear drive shafts through adherence to design specifications and standards, computer-aided design and simulation, careful material selection, prototype development and testing, precise manufacturing processes, compliance with standards and certifications, and a commitment to continuous improvement. These measures collectively ensure that rear drive shafts are compatible with a wide range of vehicle models, drivetrain configurations, and operating conditions. Additionally, they guarantee that rear drive shafts meet the required performance, safety, and quality standards, providing reliable and efficient operation in the vehicle’s drivetrain system.
Can Rear Drive Shafts Be Customized for Specific Vehicle Configurations or Upgrades?
Rear drive shafts can indeed be customized to accommodate specific vehicle configurations or upgrades. Customization allows for optimal fitment, performance, and compatibility with modified drivetrain systems or unique vehicle configurations. Here’s a detailed explanation of how rear drive shafts can be customized for specific vehicle configurations or upgrades:
1. Length and Diameter:
Custom rear drive shafts can be manufactured with specific lengths and diameters to suit different vehicle configurations. When modifying a vehicle’s drivetrain, such as installing a lift kit, altering suspension components, or changing the transmission or differential, the drive shaft’s length and diameter may need to be adjusted accordingly. Modifying these dimensions ensures proper alignment and engagement with the transmission output shaft and differential input flange, allowing for smooth and efficient power transfer.
2. Material Selection:
Custom rear drive shafts can be crafted from different materials depending on the specific vehicle requirements or upgrades. While steel is commonly used for its strength and durability, alternative materials like aluminum or carbon fiber can be chosen to reduce weight and improve overall vehicle performance. The choice of material will depend on factors such as the vehicle’s weight, power output, intended use, and budget considerations.
3. U-Joints and CV Joints:
U-joints and CV joints are critical components of rear drive shafts, allowing for flex and rotational movement while transmitting torque. When customizing a rear drive shaft, the type and size of U-joints or CV joints can be selected based on the specific vehicle configuration or upgrade. Heavy-duty or high-performance U-joints or CV joints may be chosen to handle increased power, torque, or off-road demands. Upgraded joints can provide improved strength, reliability, and articulation angles, ensuring optimal performance in modified drivetrain setups.
4. Balancing and Harmonics:
Custom rear drive shafts can be carefully balanced to minimize vibrations and harmonics. Balancing is crucial to ensure smooth operation and prevent excessive wear on drivetrain components. When modifying or upgrading the vehicle’s drivetrain, changes in weight distribution, rotational speeds, or component stiffness can affect the dynamic balance of the drive shaft. Custom balancing techniques, such as precision weights or dynamic balancing machines, can be employed to achieve optimal balance and reduce vibrations, ensuring a comfortable and reliable driving experience.
5. Performance Enhancements:
Custom rear drive shafts can be tailored to enhance performance in specific vehicle configurations or upgrades. For example, in high-performance applications or off-road vehicles, reinforced drive shafts with thicker walls or additional gussets can be fabricated to handle increased power and torque loads. Upgraded materials, such as heat-treated alloys, can be utilized to improve strength and durability. By customizing the rear drive shaft, vehicle owners can ensure that the drivetrain system can effectively handle the demands of their specific applications.
6. Compatibility with Differential Ratios:
When changing the differential gear ratios in a vehicle, the rear drive shaft’s rotational speed and torque requirements may be affected. Custom rear drive shafts can be designed to accommodate these changes in gear ratios, ensuring proper torque transmission and maintaining compatibility between the transmission, transfer case (if applicable), and the differential. This customization helps maintain optimal drivetrain performance and prevents potential driveline vibrations or failures that may arise from mismatched gear ratios.
7. Professional Consultation and Expertise:
Customizing rear drive shafts for specific vehicle configurations or upgrades often requires professional consultation and expertise. Working with experienced drivetrain specialists, automotive engineers, or aftermarket manufacturers can help ensure that the customization aligns with the vehicle’s requirements and performance goals. These experts can provide valuable insights and recommendations, taking into account factors such as vehicle weight, powertrain modifications, intended use, and budget constraints.
In summary, rear drive shafts can be customized to suit specific vehicle configurations or upgrades. Customization options include adjusting the length and diameter, selecting appropriate materials, choosing the right type and size of U-joints or CV joints, balancing the drive shaft, incorporating performance enhancements, ensuring compatibility with differential ratios, and seeking professional consultation and expertise. By customizing rear drive shafts, vehicle owners can optimize drivetrain performance, ensure compatibility with modified configurations, and meet the unique demands of their specific applications or upgrades.
What Benefits Do Properly Functioning Rear Drive Shafts Offer for Vehicle Dynamics?
A properly functioning rear drive shaft offers several benefits for vehicle dynamics. It plays a crucial role in transmitting power, distributing torque, and maintaining stability, which directly impact the performance and handling characteristics of a vehicle. Here’s a detailed explanation of the benefits that properly functioning rear drive shafts offer for vehicle dynamics:
1. Power Delivery:
A properly functioning rear drive shaft ensures efficient power delivery from the engine or transmission to the wheels. It facilitates the transfer of torque, generated by the engine, to the rear wheels, enabling propulsion and acceleration. A well-maintained rear drive shaft minimizes power losses and mechanical friction, allowing more power to reach the wheels, resulting in improved vehicle performance.
2. Balanced Traction:
The rear drive shaft, in conjunction with the rear differential, plays a key role in distributing torque between the rear wheels. This torque distribution ensures balanced traction, especially during acceleration and cornering. Properly functioning rear drive shafts help optimize power distribution, reducing the chances of wheel slippage and providing better grip and stability on various road surfaces.
3. Enhanced Stability:
Stability is a crucial aspect of vehicle dynamics, and rear drive shafts contribute to maintaining stability during various driving conditions. By enabling torque distribution to the rear wheels, the rear drive shaft helps prevent oversteer or understeer tendencies, particularly during cornering. It allows the rear wheels to better grip the road, enhancing the vehicle’s stability and control.
4. Improved Handling:
A properly functioning rear drive shaft contributes to improved handling characteristics of a vehicle. In rear-wheel drive (RWD) configurations, the rear drive shaft’s torque transmission to the rear wheels results in a more balanced weight distribution, with a bias towards the rear. This weight distribution enhances the vehicle’s handling by providing better traction and control, especially during cornering maneuvers.
Properly functioning rear drive shafts contribute to the overall responsiveness of a vehicle. They ensure prompt power delivery and torque transfer, allowing the vehicle to respond quickly to driver inputs. This responsiveness enhances the driving experience, providing a direct and engaging connection between the driver and the road.
6. Off-Road Capability:
For vehicles equipped with four-wheel drive (4WD) or all-wheel drive (AWD) systems, properly functioning rear drive shafts are essential for off-road capability. They enable power distribution to both the front and rear wheels, enhancing traction and control on challenging terrain. By maintaining proper torque transfer, rear drive shafts ensure that the vehicle can navigate rough surfaces, steep inclines, and other off-road obstacles with improved capability and confidence.
7. Drivetrain Efficiency:
Efficient power transmission through properly functioning rear drive shafts contributes to overall drivetrain efficiency. They minimize power losses, mechanical friction, and energy waste, allowing more power to reach the wheels. This not only enhances vehicle performance but also improves fuel efficiency and optimizes the utilization of available power.
In summary, properly functioning rear drive shafts offer several benefits for vehicle dynamics. They ensure efficient power delivery, balanced traction, enhanced stability, improved handling, responsiveness, off-road capability, and drivetrain efficiency. By maintaining and optimizing rear drive shaft performance, manufacturers and drivers can enhance the overall driving experience, vehicle performance, and handling characteristics.
editor by CX 2023-09-15