Product Description
Densen customized Super large stainless steel forging transmission main shaft
Type |
Shaft |
Application |
Transmission |
Processing |
Hot forging and machining |
Material |
stainless steel |
Weight |
1T~ 20T |
Tolernace |
Controlled by ISO 8062 CT4-6 |
Design Support |
Pro-E, UG,SolidWorks,AutoCad, PDF |
Quality Control |
Material, Dimension,Performance,inside defects,Balance test |
Standard |
ASTM,DIN,JIS,ISO,GB standards |
Products show:
Declaration:
Products shown herein are made to the requirements of specific customers and are illustrative of the types of manufacturing capabilities available within CZPT group of companies.
Our policy is that none of these products will be sold to 3rd parties without written consent of the customers to whom the tooling, design and specifications belong.
Company Information
HangZhou New CZPT Casting and Forging Company is the sales company of HangZhou CZPT Group of Companies. Features of New CZPT simply summarized as below:
1. Trusted supplier of steel, iron & non-ferrous components;
2. Extensive documented quality program in place.
3. Castings, forgings, stampings, machining, welding & fabrication services.
4. 9 related factories, over 50 joint-venture sub-contractors.
5. 25+ years of manufacturing experiences, 10+ years of exporting experience
6. 100% of products sold to overseas customers.
7. 50% of customer base is forturne 500 companies.
Densen Group Architecture:
Processing support
Casting Service:
Casting is a manufacturing process in which a liquid material is usually poured into a mold, which contains a hollow cavity of the desired shape, and then allowed to solidify.
New Densen offers multiple investment casting, sand casting, permanent casting, die casting, low pressure casting, ESR casting, lost foam casting, etc. Material can be handled include steel, iron, non-ferrous. Single component weight range is from 0.01Kg to 150 tons separately.
Forging Service:
Forging is a manufacturing process involving the shaping of metal using localized compressive forces. New CZPT offers open die forging, closed die forging and ring forging services. Material can be steel, iron and non-ferrous. Material can be handled include steel, iron, non-ferrous. Single component weight range is from 0.1Kg to 50,000Kgs.
Stamping Service:
Stamping (also known as punching) is the process of placing flat sheet metal in either blank or coil form into a stamping press where a tool and die surface forms the metal into a net shape.
New Densen-XBL has more than 60 sets stamping equipments, is the designed supplier for several famous bands automotive companies, has the full ability to offer whole processes from blanking, stamping, welding, to electrostatic spraying for CZPT customers.
Welding & Fabrication Service:
Welding Frabrication is the fabrication process of metal structures by cutting, bending, then assembling the components together through welding
New CZPT offers manual arc welding ,laser welding and robot welding etc. UT, MPT,RT,PT all are available used for inspection, WPS &PQR (Welding Process Specification& Procedure Qualification Records) before production is available under clients’ requirement.
Machining Service:
Machining is any of various processes in which a piece of raw material is cut into a desired final shape and size by a controlled material-removal process.
New Densen-XBL has more than 60 sets precision machines incl. CNC center, boring, milling, lathing, etc., and more than 300 inspection instruments incl. 3 sets CMM with grade μm. Repeated tolerance can be maintained as 0.02mm. Meanwhile awarded by certificates ISO9001-2008; ISO/TS16949. New Densen-XBL specialized in high precise machining for small-middle-big metal components.
3rd Party Inspection:
New Densen worked as 3rd party inspection center besides its sister factories or sub-contractors’ self inspection, Offers process inspection, random inspection and before delivedry inspection services for material, mechanical, inside defects, dimentional, pressure, load, balance, surface treatment, visual inspection and test. Weekly project follow-up report together with pictures and videos, full quality inspection documentation available.
New CZPT also designed as 3rd party inspection representative for several customers when their products made by other suppliers.
Contact us
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Processing Object: | Metal |
---|---|
Molding Style: | Forging |
Molding Technics: | Pressure Casting |
Samples: |
US$ 1.8/kg
1 kg(Min.Order) | Order Sample |
---|
Customization: |
Available
| Customized Request |
---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: |
|
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
How do drive shafts ensure efficient power transfer while maintaining balance?
Drive shafts employ various mechanisms to ensure efficient power transfer while maintaining balance. Efficient power transfer refers to the ability of the drive shaft to transmit rotational power from the source (such as an engine) to the driven components (such as wheels or machinery) with minimal energy loss. Balancing, on the other hand, involves minimizing vibrations and eliminating any uneven distribution of mass that can cause disturbances during operation. Here’s an explanation of how drive shafts achieve both efficient power transfer and balance:
1. Material Selection:
The material selection for drive shafts is crucial for maintaining balance and ensuring efficient power transfer. Drive shafts are commonly made from materials such as steel or aluminum alloys, chosen for their strength, stiffness, and durability. These materials have excellent dimensional stability and can withstand the torque loads encountered during operation. By using high-quality materials, drive shafts can minimize deformation, flexing, and imbalances that could compromise power transmission and generate vibrations.
2. Design Considerations:
The design of the drive shaft plays a significant role in both power transfer efficiency and balance. Drive shafts are engineered to have appropriate dimensions, including diameter and wall thickness, to handle the anticipated torque loads without excessive deflection or vibration. The design also considers factors such as the length of the drive shaft, the number and type of joints (such as universal joints or constant velocity joints), and the use of balancing weights. By carefully designing the drive shaft, manufacturers can achieve optimal power transfer efficiency while minimizing the potential for imbalance-induced vibrations.
3. Balancing Techniques:
Balance is crucial for drive shafts as any imbalance can cause vibrations, noise, and accelerated wear. To maintain balance, drive shafts undergo various balancing techniques during the manufacturing process. Static and dynamic balancing methods are employed to ensure that the mass distribution along the drive shaft is uniform. Static balancing involves adding counterweights at specific locations to offset any weight imbalances. Dynamic balancing is performed by spinning the drive shaft at high speeds and measuring any vibrations. If imbalances are detected, additional adjustments are made to achieve a balanced state. These balancing techniques help minimize vibrations and ensure smooth operation of the drive shaft.
4. Universal Joints and Constant Velocity Joints:
Drive shafts often incorporate universal joints (U-joints) or constant velocity (CV) joints to accommodate misalignment and maintain balance during operation. U-joints are flexible joints that allow for angular movement between shafts. They are typically used in applications where the drive shaft operates at varying angles. CV joints, on the other hand, are designed to maintain a constant velocity of rotation and are commonly used in front-wheel-drive vehicles. By incorporating these joints, drive shafts can compensate for misalignment, reduce stress on the shaft, and minimize vibrations that can negatively impact power transfer efficiency and balance.
5. Maintenance and Inspection:
Regular maintenance and inspection of drive shafts are essential for ensuring efficient power transfer and balance. Periodic checks for wear, damage, or misalignment can help identify any issues that may affect the drive shaft’s performance. Lubrication of the joints and proper tightening of fasteners are also critical for maintaining optimal operation. By adhering to recommended maintenance procedures, any imbalances or inefficiencies can be addressed promptly, ensuring continued efficient power transfer and balance.
In summary, drive shafts ensure efficient power transfer while maintaining balance through careful material selection, thoughtful design considerations, balancing techniques, and the incorporation of flexible joints. By optimizing these factors, drive shafts can transmit rotational power smoothly and reliably, minimizing energy losses and vibrations that can impact performance and longevity.
How do drive shafts enhance the performance of automobiles and trucks?
Drive shafts play a significant role in enhancing the performance of automobiles and trucks. They contribute to various aspects of vehicle performance, including power delivery, traction, handling, and overall efficiency. Here’s a detailed explanation of how drive shafts enhance the performance of automobiles and trucks:
1. Power Delivery:
Drive shafts are responsible for transferring power from the engine to the wheels, enabling the vehicle to move forward. By efficiently transmitting power without significant losses, drive shafts ensure that the engine’s power is effectively utilized, resulting in improved acceleration and overall performance. Well-designed drive shafts with minimal power loss contribute to the vehicle’s ability to deliver power to the wheels efficiently.
2. Torque Transfer:
Drive shafts facilitate the transfer of torque from the engine to the wheels. Torque is the rotational force that drives the vehicle forward. High-quality drive shafts with proper torque conversion capabilities ensure that the torque generated by the engine is effectively transmitted to the wheels. This enhances the vehicle’s ability to accelerate quickly, tow heavy loads, and climb steep gradients, thereby improving overall performance.
3. Traction and Stability:
Drive shafts contribute to the traction and stability of automobiles and trucks. They transmit power to the wheels, allowing them to exert force on the road surface. This enables the vehicle to maintain traction, especially during acceleration or when driving on slippery or uneven terrain. The efficient power delivery through the drive shafts enhances the vehicle’s stability by ensuring balanced power distribution to all wheels, improving control and handling.
4. Handling and Maneuverability:
Drive shafts have an impact on the handling and maneuverability of vehicles. They help establish a direct connection between the engine and the wheels, allowing for precise control and responsive handling. Well-designed drive shafts with minimal play or backlash contribute to a more direct and immediate response to driver inputs, enhancing the vehicle’s agility and maneuverability.
5. Weight Reduction:
Drive shafts can contribute to weight reduction in automobiles and trucks. Lightweight drive shafts made from materials such as aluminum or carbon fiber-reinforced composites reduce the overall weight of the vehicle. The reduced weight improves the power-to-weight ratio, resulting in better acceleration, handling, and fuel efficiency. Additionally, lightweight drive shafts reduce the rotational mass, allowing the engine to rev up more quickly, further enhancing performance.
6. Mechanical Efficiency:
Efficient drive shafts minimize energy losses during power transmission. By incorporating features such as high-quality bearings, low-friction seals, and optimized lubrication, drive shafts reduce friction and minimize power losses due to internal resistance. This enhances the mechanical efficiency of the drivetrain system, allowing more power to reach the wheels and improving overall vehicle performance.
7. Performance Upgrades:
Drive shaft upgrades can be a popular performance enhancement for enthusiasts. Upgraded drive shafts, such as those made from stronger materials or with enhanced torque capacity, can handle higher power outputs from modified engines. These upgrades allow for increased performance, such as improved acceleration, higher top speeds, and better overall driving dynamics.
8. Compatibility with Performance Modifications:
Performance modifications, such as engine upgrades, increased power output, or changes to the drivetrain system, often require compatible drive shafts. Drive shafts designed to handle higher torque loads or adapt to modified drivetrain configurations ensure optimal performance and reliability. They enable the vehicle to effectively harness the increased power and torque, resulting in improved performance and responsiveness.
9. Durability and Reliability:
Robust and well-maintained drive shafts contribute to the durability and reliability of automobiles and trucks. They are designed to withstand the stresses and loads associated with power transmission. High-quality materials, appropriate balancing, and regular maintenance help ensure that drive shafts operate smoothly, minimizing the risk of failures or performance issues. Reliable drive shafts enhance the overall performance by providing consistent power delivery and minimizing downtime.
10. Compatibility with Advanced Technologies:
Drive shafts are evolving in tandem with advancements in vehicle technologies. They are increasingly being integrated with advanced systems such as hybrid powertrains, electric motors, and regenerative braking. Drive shafts designed to work seamlessly with these technologies maximize their efficiency and performance benefits, contributing to improved overall vehicle performance.
In summary, drive shafts enhance the performance of automobiles and trucks by optimizing power delivery, facilitating torque transfer, improving traction and stability, enhancing handling and maneuverability, reducing weight, increasing mechanical efficiency,and enabling compatibility with performance upgrades and advanced technologies. They play a crucial role in ensuring efficient power transmission, responsive acceleration, precise handling, and overall improved performance of vehicles.
What is a drive shaft and how does it function in vehicles and machinery?
A drive shaft, also known as a propeller shaft or prop shaft, is a mechanical component that plays a critical role in transmitting rotational power from the engine to the wheels or other driven components in vehicles and machinery. It is commonly used in various types of vehicles, including cars, trucks, motorcycles, and agricultural or industrial machinery. Here’s a detailed explanation of what a drive shaft is and how it functions:
1. Definition and Construction: A drive shaft is a cylindrical metal tube that connects the engine or power source to the wheels or driven components. It is typically made of steel or aluminum and consists of one or more tubular sections with universal joints (U-joints) at each end. These U-joints allow for angular movement and compensation of misalignment between the engine/transmission and the driven wheels or components.
2. Power Transmission: The primary function of a drive shaft is to transmit rotational power from the engine or power source to the wheels or driven components. In vehicles, the drive shaft connects the transmission or gearbox output shaft to the differential, which then transfers power to the wheels. In machinery, the drive shaft transfers power from the engine or motor to various driven components such as pumps, generators, or other mechanical systems.
3. Torque and Speed: The drive shaft is responsible for transmitting both torque and rotational speed. Torque is the rotational force generated by the engine or power source, while rotational speed is the number of revolutions per minute (RPM). The drive shaft must be capable of transmitting the required torque without excessive twisting or bending and maintaining the desired rotational speed for efficient operation of the driven components.
4. Flexible Coupling: The U-joints on the drive shaft provide a flexible coupling that allows for angular movement and compensation of misalignment between the engine/transmission and the driven wheels or components. As the suspension system of a vehicle moves or the machinery operates on uneven terrain, the drive shaft can adjust its length and angle to accommodate these movements, ensuring smooth power transmission and preventing damage to the drivetrain components.
5. Length and Balance: The length of the drive shaft is determined by the distance between the engine or power source and the driven wheels or components. It should be appropriately sized to ensure proper power transmission and avoid excessive vibrations or bending. Additionally, the drive shaft is carefully balanced to minimize vibrations and rotational imbalances, which can cause discomfort, reduce efficiency, and lead to premature wear of drivetrain components.
6. Safety Considerations: Drive shafts in vehicles and machinery require proper safety measures. In vehicles, drive shafts are often enclosed within a protective tube or housing to prevent contact with moving parts and reduce the risk of injury in the event of a malfunction or failure. Additionally, safety shields or guards are commonly installed around exposed drive shafts in machinery to protect operators from potential hazards associated with rotating components.
7. Maintenance and Inspection: Regular maintenance and inspection of drive shafts are essential to ensure their proper functioning and longevity. This includes checking for signs of wear, damage, or excessive play in the U-joints, inspecting the drive shaft for any cracks or deformations, and lubricating the U-joints as recommended by the manufacturer. Proper maintenance helps prevent failures, ensures optimal performance, and prolongs the service life of the drive shaft.
In summary, a drive shaft is a mechanical component that transmits rotational power from the engine or power source to the wheels or driven components in vehicles and machinery. It functions by providing a rigid connection between the engine/transmission and the driven wheels or components, while also allowing for angular movement and compensation of misalignment through the use of U-joints. The drive shaft plays a crucial role in power transmission, torque and speed delivery, flexible coupling, length and balance considerations, safety, and maintenance requirements. Its proper functioning is essential for the smooth and efficient operation of vehicles and machinery.
editor by CX 2024-05-09
China wholesaler Main Drive Shaft Me636004 for CZPT FM657 M070 Fk617 M060s6 Euro-3 6D17
Product Description
Product Description
Item No. | ME636004 | Material | Mental |
Brand | FXihu (West Lake) Dis. | MOQ | 10PCS |
Place of Origin | HangZhou, China | Size | Standard |
Application | Fuso/Mitsubishi FM657 M070 FK617 M060S6 EURO-3 6D17 | Shipment | By Sea |
More Item for FUSO
More Model
For HINO
W06E,P11C,EF750,K13C,K13D,N04C,W04D,P09C,H06C,H07C,H07D,F17C,F17E,F20C,J08C,J08E,J05D,J05C
For CZPT FUSO
4D32,4D33,4D34,4D35,6D14,6D15,6D16,6D17,6D22,6D24,6D40,8DC9,8DC10,8DC11
For ISUZU
4JB1,4JH1,4JJ1,4BE1,4BD1,4HF1,4HG1,4HE1,4HK1,6BD1,6BE1,6SD1,6SA1,6QA1,6HE1,6HH1,6HK1,10PC1,10PD1,10PE1,12PC1,12PD1,6WA1,6WG1,6WF1
For CZPT UD
PF6,PE6,PD6,NE6,ND6,FD46,DF42,FD42,FD35,ED35,ED33,RH10,RH8,RD8,TD27,TD42
Company Information
HangZhou FXihu (West Lake) Dis. Auto Parts Co.,Ltd is professional Truck Spare Parts with more than 5 years experience with rich experience and successful cases .
Trucks we are dealing with are HINO Trucks, for ISUZU Trucks, CZPT CZPT Trucks ,NISSAN UD Trucks , CZPT Trucks , and so on.
Items we supplying are Front Panels , Front Bumpers , Lower Bumpers , Corner Panels , Bumper Panels , Head Lamps ,Corner Lamps , Fog Lamps , Side Lamps , Mirrors,Mirrors Arms ,Mirrors Caps , Step Panels ,Tanks and more .
Packing
After-sales Service: | Yes |
---|---|
Warranty: | 3 Month |
Type: | Main Drive Shaft |
Product Name: | Main Drive Shaft |
Application: | for Fuso/Mitsubishi FM657 M070 Fk617 M060s6 Euro-3 |
Shipment: | by Sea |
What maintenance practices are crucial for prolonging the lifespan of drive shafts?
To prolong the lifespan of drive shafts and ensure their optimal performance, several maintenance practices are crucial. Regular maintenance helps identify and address potential issues before they escalate, reduces wear and tear, and ensures the drive shaft operates smoothly and efficiently. Here are some essential maintenance practices for prolonging the lifespan of drive shafts:
1. Regular Inspection:
Performing regular inspections is vital for detecting any signs of wear, damage, or misalignment. Inspect the drive shaft visually, looking for cracks, dents, or any signs of excessive wear on the shaft itself and its associated components such as joints, yokes, and splines. Check for any signs of lubrication leaks or contamination. Additionally, inspect the fasteners and mounting points to ensure they are secure. Early detection of any issues allows for timely repairs or replacements, preventing further damage to the drive shaft.
2. Lubrication:
Proper lubrication is essential for the smooth operation and longevity of drive shafts. Lubricate the joints, such as universal joints or constant velocity joints, as recommended by the manufacturer. Lubrication reduces friction, minimizes wear, and helps dissipate heat generated during operation. Use the appropriate lubricant specified for the specific drive shaft and application, considering factors such as temperature, load, and operating conditions. Regularly check the lubrication levels and replenish as necessary to ensure optimal performance and prevent premature failure.
3. Balancing and Alignment:
Maintaining proper balancing and alignment is crucial for the lifespan of drive shafts. Imbalances or misalignments can lead to vibrations, accelerated wear, and potential failure. If vibrations or unusual noises are detected during operation, it is important to address them promptly. Perform balancing procedures as necessary, including dynamic balancing, to ensure even weight distribution along the drive shaft. Additionally, verify that the drive shaft is correctly aligned with the engine or power source and the driven components. Misalignment can cause excessive stress on the drive shaft, leading to premature failure.
4. Protective Coatings:
Applying protective coatings can help prolong the lifespan of drive shafts, particularly in applications exposed to harsh environments or corrosive substances. Consider using coatings such as zinc plating, powder coating, or specialized corrosion-resistant coatings to enhance the drive shaft’s resistance to corrosion, rust, and chemical damage. Regularly inspect the coating for any signs of degradation or damage, and reapply or repair as necessary to maintain the protective barrier.
5. Torque and Fastener Checks:
Ensure that the drive shaft’s fasteners, such as bolts, nuts, or clamps, are properly torqued and secured according to the manufacturer’s specifications. Loose or improperly tightened fasteners can lead to excessive vibrations, misalignment, or even detachment of the drive shaft. Periodically check and retighten the fasteners as recommended or after any maintenance or repair procedures. Additionally, monitor the torque levels during operation to ensure they remain within the specified range, as excessive torque can strain the drive shaft and lead to premature failure.
6. Environmental Protection:
Protecting the drive shaft from environmental factors can significantly extend its lifespan. In applications exposed to extreme temperatures, moisture, chemicals, or abrasive substances, take appropriate measures to shield the drive shaft. This may include using protective covers, seals, or guards to prevent contaminants from entering and causing damage. Regular cleaning of the drive shaft, especially in dirty or corrosive environments, can also help remove debris and prevent buildup that could compromise its performance and longevity.
7. Manufacturer Guidelines:
Follow the manufacturer’s guidelines and recommendations for maintenance practices specific to the drive shaft model and application. The manufacturer’s instructions may include specific intervals for inspections, lubrication, balancing, or other maintenance tasks. Adhering to these guidelines ensures that the drive shaft is properly maintained and serviced, maximizing its lifespan and minimizing the risk of unexpected failures.
By implementing these maintenance practices, drive shafts can operate reliably, maintain efficient power transmission, and have an extended service life, ultimately reducing downtime and ensuring optimal performance in various applications.
How do drive shafts enhance the performance of automobiles and trucks?
Drive shafts play a significant role in enhancing the performance of automobiles and trucks. They contribute to various aspects of vehicle performance, including power delivery, traction, handling, and overall efficiency. Here’s a detailed explanation of how drive shafts enhance the performance of automobiles and trucks:
1. Power Delivery: Drive shafts are responsible for transmitting power from the engine to the wheels, enabling the vehicle to move forward. By efficiently transferring power without significant losses, drive shafts ensure that the engine’s power is effectively utilized, resulting in improved acceleration and overall performance. Well-designed drive shafts with minimal power loss contribute to the vehicle’s ability to deliver power to the wheels efficiently.
2. Torque Transfer: Drive shafts facilitate the transfer of torque from the engine to the wheels. Torque is the rotational force that drives the vehicle forward. High-quality drive shafts with proper torque conversion capabilities ensure that the torque generated by the engine is effectively transmitted to the wheels. This enhances the vehicle’s ability to accelerate quickly, tow heavy loads, and climb steep gradients, thereby improving overall performance.
3. Traction and Stability: Drive shafts contribute to the traction and stability of automobiles and trucks. They transmit power to the wheels, allowing them to exert force on the road surface. This enables the vehicle to maintain traction, especially during acceleration or when driving on slippery or uneven terrain. The efficient power delivery through the drive shafts enhances the vehicle’s stability by ensuring balanced power distribution to all wheels, improving control and handling.
4. Handling and Maneuverability: Drive shafts have an impact on the handling and maneuverability of vehicles. They help establish a direct connection between the engine and the wheels, allowing for precise control and responsive handling. Well-designed drive shafts with minimal play or backlash contribute to a more direct and immediate response to driver inputs, enhancing the vehicle’s agility and maneuverability.
5. Weight Reduction: Drive shafts can contribute to weight reduction in automobiles and trucks. Lightweight drive shafts made from materials such as aluminum or carbon fiber-reinforced composites reduce the overall weight of the vehicle. The reduced weight improves the power-to-weight ratio, resulting in better acceleration, handling, and fuel efficiency. Additionally, lightweight drive shafts reduce the rotational mass, allowing the engine to rev up more quickly, further enhancing performance.
6. Mechanical Efficiency: Efficient drive shafts minimize energy losses during power transmission. By incorporating features such as high-quality bearings, low-friction seals, and optimized lubrication, drive shafts reduce friction and minimize power losses due to internal resistance. This enhances the mechanical efficiency of the drivetrain system, allowing more power to reach the wheels and improving overall vehicle performance.
7. Performance Upgrades: Drive shaft upgrades can be popular performance enhancements for enthusiasts. Upgraded drive shafts, such as those made from stronger materials or with enhanced torque capacity, can handle higher power outputs from modified engines. These upgrades allow for increased performance, such as improved acceleration, higher top speeds, and better overall driving dynamics.
8. Compatibility with Performance Modifications: Performance modifications, such as engine upgrades, increased power output, or changes to the drivetrain system, often require compatible drive shafts. Drive shafts designed to handle higher torque loads or adapt to modified drivetrain configurations ensure optimal performance and reliability. They enable the vehicle to effectively harness the increased power and torque, resulting in improved performance and responsiveness.
9. Durability and Reliability: Robust and well-maintained drive shafts contribute to the durability and reliability of automobiles and trucks. They are designed to withstand the stresses and loads associated with power transmission. High-quality materials, appropriate balancing, and regular maintenance help ensure that drive shafts operate smoothly, minimizing the risk of failures or performance issues. Reliable drive shafts enhance the overall performance by providing consistent power delivery and minimizing downtime.
10. Compatibility with Advanced Technologies: Drive shafts are evolving in tandem with advancements in vehicle technologies. They are increasingly being integrated with advanced systems such as hybrid powertrains, electric motors, and regenerative braking. Drive shafts designed to work seamlessly with these technologies maximize their efficiency and performance benefits, contributing to improved overall vehicle performance.
In summary, drive shafts enhance the performance of automobiles and trucks by optimizing power delivery, facilitating torque transfer, improving traction and stability, enhancing handling and maneuverability, reducing weight, increasing mechanical efficiency, enabling compatibility with performance upgrades and advanced technologies, and ensuring durability and reliability. They play a crucial role in ensuring efficient power transmission, responsive acceleration, precise handling, and overall improved performance of vehicles.
How do drive shafts contribute to transferring rotational power in various applications?
Drive shafts play a crucial role in transferring rotational power from the engine or power source to the wheels or driven components in various applications. Whether it’s in vehicles or machinery, drive shafts enable efficient power transmission and facilitate the functioning of different systems. Here’s a detailed explanation of how drive shafts contribute to transferring rotational power:
1. Vehicle Applications:
In vehicles, drive shafts are responsible for transmitting rotational power from the engine to the wheels, enabling the vehicle to move. The drive shaft connects the gearbox or transmission output shaft to the differential, which further distributes the power to the wheels. As the engine generates torque, it is transferred through the drive shaft to the wheels, propelling the vehicle forward. This power transfer allows the vehicle to accelerate, maintain speed, and overcome resistance, such as friction and inclines.
2. Machinery Applications:
In machinery, drive shafts are utilized to transfer rotational power from the engine or motor to various driven components. For example, in industrial machinery, drive shafts may be used to transmit power to pumps, generators, conveyors, or other mechanical systems. In agricultural machinery, drive shafts are commonly employed to connect the power source to equipment such as harvesters, balers, or irrigation systems. Drive shafts enable these machines to perform their intended functions by delivering rotational power to the necessary components.
3. Power Transmission:
Drive shafts are designed to transmit rotational power efficiently and reliably. They are capable of transferring substantial amounts of torque from the engine to the wheels or driven components. The torque generated by the engine is transmitted through the drive shaft without significant power losses. By maintaining a rigid connection between the engine and the driven components, drive shafts ensure that the power produced by the engine is effectively utilized in performing useful work.
4. Flexible Coupling:
One of the key functions of drive shafts is to provide a flexible coupling between the engine/transmission and the wheels or driven components. This flexibility allows the drive shaft to accommodate angular movement and compensate for misalignment between the engine and the driven system. In vehicles, as the suspension system moves or the wheels encounter uneven terrain, the drive shaft adjusts its length and angle to maintain a constant power transfer. This flexibility helps prevent excessive stress on the drivetrain components and ensures smooth power transmission.
5. Torque and Speed Transmission:
Drive shafts are responsible for transmitting both torque and rotational speed. Torque is the rotational force generated by the engine or power source, while rotational speed is the number of revolutions per minute (RPM). Drive shafts must be capable of handling the torque requirements of the application without excessive twisting or bending. Additionally, they need to maintain the desired rotational speed to ensure the proper functioning of the driven components. Proper design, material selection, and balancing of the drive shafts contribute to efficient torque and speed transmission.
6. Length and Balance:
The length and balance of drive shafts are critical factors in their performance. The length of the drive shaft is determined by the distance between the engine or power source and the driven components. It should be appropriately sized to avoid excessive vibrations or bending. Drive shafts are carefully balanced to minimize vibrations and rotational imbalances, which can affect the overall performance, comfort, and longevity of the drivetrain system.
7. Safety and Maintenance:
Drive shafts require proper safety measures and regular maintenance. In vehicles, drive shafts are often enclosed within a protective tube or housing to prevent contact with moving parts, reducing the risk of injury. Safety shields or guards may also be installed around exposed drive shafts in machinery to protect operators from potential hazards. Regular maintenance includes inspecting the drive shaft for wear, damage, or misalignment, and ensuring proper lubrication of the U-joints. These measures help prevent failures, ensure optimal performance, and extend the service life of the drive shaft.
In summary, drive shafts play a vital role in transferring rotational power in various applications. Whether in vehicles or machinery, drive shafts enable efficient power transmission from the engine or power source to the wheels or driven components. They provide a flexible coupling, handle torque and speed transmission, accommodate angular movement, and contribute to the safety and maintenance of the system. By effectively transferring rotational power, drive shafts facilitate the functioning and performance of vehicles and machinery in numerous industries.
editor by CX 2023-10-20
China Hot selling Propeller Shaft / Drive Shaft for CZPT CZPT / Escape / Explorer / F-150 / Ranger Main for America & Europe Market +600 Items drive shaft ends
Product Description
OEM |
65-9152, 65-9153, 65-9160, 65-9164, 65-9170, 65-9416, 65-9431,7T4Z4R602A, 65-93/8822 0571 8 |
45710-S10-A01 |
12344543 |
27111-SC571 |
936-571 |
45710-S9A-E01 |
936-911 |
27111-AJ13D |
|
936-034 |
45710-S9A-J01 |
936-916 |
27101-84C00 |
|
for MITSUBISHI/NISSAN |
for TOYOTA |
|||
CARDONE |
OE |
CARDONE |
OE |
|
65-3009 |
MR580626 |
65-5007 |
37140-35180 |
|
65-6000 |
3401A571 |
65-9842 |
37140-35040 |
|
65-9480 |
37000-JM14A |
65-5571 |
37100-3D250 |
|
65-9478 |
37000-S3805 |
65-5030 |
37100-34120 |
|
65-6004 |
37000-S4203 |
65-9265 |
37110-3D070 |
|
65-6571 |
37041-90062 |
65-9376 |
37110-35880 |
|
936-262 |
37041-90014 |
65-5571 |
37110-3D220 |
|
938-030 |
37300-F3600 |
65-5571 |
37100-34111 |
|
936-363 |
37000-7C002 |
65-5018 |
37110-3D060 |
|
938-200 |
37000-7C001 |
65-5012 |
37100-5712 |
|
for KOREA CAR |
||||
for HYUNDAI/KIA |
||||
CARDONE |
OE |
CARDONE |
OE |
|
65-3502 |
49571-H1031 |
936-211 |
49100-3E450 |
|
65-3503 |
49300-2S000 |
936-210 |
49100-3E400 |
|
65-3500 |
49300-0L000 |
936-200 |
49300-2P500 |
KOWA is a special brand focus on Propeller shaft main for America and Europe market.
It is a brand created by NINGBNO CZPT AUTO PARTSCo.,ltd, who has been manufacturing
and trading all kinds of auto parts for more than 10 years.
KOWA brand with 1 year quality assurance at the factory price by MOQ 5pcs
After-sales Service: | 1 Year |
---|---|
Condition: | New |
Color: | Black |
Certification: | ISO, Ts16949 |
Type: | Drive Shaft |
Application Brand: | Ford |
Samples: |
US$ 300/Piece
1 Piece(Min.Order) | |
---|
Customization: |
Available
| Customized Request |
---|
Guide to Drive Shafts and U-Joints
If you’re concerned about the performance of your car’s driveshaft, you’re not alone. Many car owners are unaware of the warning signs of a failed driveshaft, but knowing what to look for can help you avoid costly repairs. Here is a brief guide on drive shafts, U-joints and maintenance intervals. Listed below are key points to consider before replacing a vehicle driveshaft.
Symptoms of Driveshaft Failure
Identifying a faulty driveshaft is easy if you’ve ever heard a strange noise from under your car. These sounds are caused by worn U-joints and bearings supporting the drive shaft. When they fail, the drive shafts stop rotating properly, creating a clanking or squeaking sound. When this happens, you may hear noise from the side of the steering wheel or floor.
In addition to noise, a faulty driveshaft can cause your car to swerve in tight corners. It can also lead to suspended bindings that limit overall control. Therefore, you should have these symptoms checked by a mechanic as soon as you notice them. If you notice any of the symptoms above, your next step should be to tow your vehicle to a mechanic. To avoid extra trouble, make sure you’ve taken precautions by checking your car’s oil level.
In addition to these symptoms, you should also look for any noise from the drive shaft. The first thing to look for is the squeak. This was caused by severe damage to the U-joint attached to the drive shaft. In addition to noise, you should also look for rust on the bearing cap seals. In extreme cases, your car can even shudder when accelerating.
Vibration while driving can be an early warning sign of a driveshaft failure. Vibration can be due to worn bushings, stuck sliding yokes, or even springs or bent yokes. Excessive torque can be caused by a worn center bearing or a damaged U-joint. The vehicle may make unusual noises in the chassis system.
If you notice these signs, it’s time to take your car to a mechanic. You should check regularly, especially heavy vehicles. If you’re not sure what’s causing the noise, check your car’s transmission, engine, and rear differential. If you suspect that a driveshaft needs to be replaced, a certified mechanic can replace the driveshaft in your car.
Drive shaft type
Driveshafts are used in many different types of vehicles. These include four-wheel drive, front-engine rear-wheel drive, motorcycles and boats. Each type of drive shaft has its own purpose. Below is an overview of the three most common types of drive shafts:
The driveshaft is a circular, elongated shaft that transmits torque from the engine to the wheels. Drive shafts often contain many joints to compensate for changes in length or angle. Some drive shafts also include connecting shafts and internal constant velocity joints. Some also include torsional dampers, spline joints, and even prismatic joints. The most important thing about the driveshaft is that it plays a vital role in transmitting torque from the engine to the wheels.
The drive shaft needs to be both light and strong to move torque. While steel is the most commonly used material for automotive driveshafts, other materials such as aluminum, composites, and carbon fiber are also commonly used. It all depends on the purpose and size of the vehicle. Precision Manufacturing is a good source for OEM products and OEM driveshafts. So when you’re looking for a new driveshaft, keep these factors in mind when buying.
Cardan joints are another common drive shaft. A universal joint, also known as a U-joint, is a flexible coupling that allows one shaft to drive the other at an angle. This type of drive shaft allows power to be transmitted while the angle of the other shaft is constantly changing. While a gimbal is a good option, it’s not a perfect solution for all applications.
CZPT, Inc. has state-of-the-art machinery to service all types of drive shafts, from small cars to race cars. They serve a variety of needs, including racing, industry and agriculture. Whether you need a new drive shaft or a simple adjustment, the staff at CZPT can meet all your needs. You’ll be back on the road soon!
U-joint
If your car yoke or u-joint shows signs of wear, it’s time to replace them. The easiest way to replace them is to follow the steps below. Use a large flathead screwdriver to test. If you feel any movement, the U-joint is faulty. Also, inspect the bearing caps for damage or rust. If you can’t find the u-joint wrench, try checking with a flashlight.
When inspecting U-joints, make sure they are properly lubricated and lubricated. If the joint is dry or poorly lubricated, it can quickly fail and cause your car to squeak while driving. Another sign that a joint is about to fail is a sudden, excessive whine. Check your u-joints every year or so to make sure they are in proper working order.
Whether your u-joint is sealed or lubricated will depend on the make and model of your vehicle. When your vehicle is off-road, you need to install lubricable U-joints for durability and longevity. A new driveshaft or derailleur will cost more than a U-joint. Also, if you don’t have a good understanding of how to replace them, you may need to do some transmission work on your vehicle.
When replacing the U-joint on the drive shaft, be sure to choose an OEM replacement whenever possible. While you can easily repair or replace the original head, if the u-joint is not lubricated, you may need to replace it. A damaged gimbal joint can cause problems with your car’s transmission or other critical components. Replacing your car’s U-joint early can ensure its long-term performance.
Another option is to use two CV joints on the drive shaft. Using multiple CV joints on the drive shaft helps you in situations where alignment is difficult or operating angles do not match. This type of driveshaft joint is more expensive and complex than a U-joint. The disadvantages of using multiple CV joints are additional length, weight, and reduced operating angle. There are many reasons to use a U-joint on a drive shaft.
maintenance interval
Checking U-joints and slip joints is a critical part of routine maintenance. Most vehicles are equipped with lube fittings on the driveshaft slip joint, which should be checked and lubricated at every oil change. CZPT technicians are well-versed in axles and can easily identify a bad U-joint based on the sound of acceleration or shifting. If not repaired properly, the drive shaft can fall off, requiring expensive repairs.
Oil filters and oil changes are other parts of a vehicle’s mechanical system. To prevent rust, the oil in these parts must be replaced. The same goes for transmission. Your vehicle’s driveshaft should be inspected at least every 60,000 miles. The vehicle’s transmission and clutch should also be checked for wear. Other components that should be checked include PCV valves, oil lines and connections, spark plugs, tire bearings, steering gearboxes and brakes.
If your vehicle has a manual transmission, it is best to have it serviced by CZPT’s East Lexington experts. These services should be performed every two to four years or every 24,000 miles. For best results, refer to the owner’s manual for recommended maintenance intervals. CZPT technicians are experienced in axles and differentials. Regular maintenance of your drivetrain will keep it in good working order.
editor by CX 2023-04-18
china Cheap Truck Transmission Gearbox Parts Reserve Gear Main Shaft for Eaton Fuller 16756 manufacturers
Item Description
Product Description
oem | 16756 |
Product name | Transmission gearbox |
application | for eaton fuller |
Packaging & CZPT
To much better make sure the security of your products, expert, environmentally helpful, hassle-free and efficient packaging services will be offered.
Business Profile
HangZhou CZPT CZPT Component CO.,LTD devoted to consumer’s excellent life good quality, supplies the best good quality merchandise,professional knowledge, sensible price and the very best service .We appear ahead to the frequent hard work with all the automobile and truck areas user.With CZPT ers assist, we imagine that HangZhou CZPT CZPT Component CO.,LTD will become a prestigious company with excellent will and very good track record,which will help to consolodate CZPT perception to do CZPT very best very best on the vehicle and truck elements.Our components such as Engine Elements, Transmission Elements,Suspension Parts,Body Areas…ect.We also provide you used components/total engines with CZPT /cabs/front&rear alxes&full vans Japan and CZPT pean sorts if you are intrigued. We are certain that CZPT large quality of items , quite affordable rates and best providers would be the one that you can reply on for CZPT time period enterprise.With CZPT honesty and credit score, we sincerely hope to cooperate with you for better advancement. Welcome new and old CZPT ers from all walks of existence to get in touch with us for potential business relationships and reaching mutual success!
FAQ
* What is your conditions of packing?
A: Typically, we pack CZPT products in CZPT white bins and brown cartons. If you have legally registered patent,
we can pack the items in your branded boxes soon after obtaining your authorization letters.
* What is your conditions of payment?
A: T/T thirty% as deposit, and 70% ahead of shipping and delivery. We are going to present you the images of the items and offers
before you spend the equilibrium.
* What is your conditions of shipping?
A: EXW, FOB, CFR, CIF.
* How about your supply time?
A: Normally, it will get thirty to 60 days soon after obtaining your CZPT payment. The specific shipping time is dependent
on the products and the quantity of your buy.
* Can you produce in accordance to the samples?
A: Indeed, we can produce by your samples or complex drawings. We can build the molds and fixtures.
Action now get in touch with us for whole CATALOG.
Much more THEN 2000 Kinds OF CZPT CZPT WAITTING FOR YHOU. Remember to Make contact with US THE Entire CATALOG.
Trust YOU WILL LIKE OUR Styles & Price tag.
china Cheap 26107557161 / 26107573574 for BMW 525I 04-07 Rear Drive Shaft / Driveshaft / Propeller Shaft Over 600+Items Main Sell in America Market manufacturers
Solution Description
OEM |
26203401609 2625716571 2625717649 2625719985 2625718629 a lot more |
Application |
for BMW X3 325I x5 e53 3 4 5 6 7 collection |
As a specialist producer for propeller shaft, we have +600 things for all kinds of car, major suited
for The united states & EUROPE marketplace.
Our edge:
one. Complete variety of products
2. MOQ qty: 5pcs/objects
three. Supply on time
4: Guarantee: 1 12 months
five. Develope new things: Free of charge
For some items, we have stock, so modest purchase (+5000USD) is welcome.
The adhering to items are some of CZPT products, If you require much more data, pls contact us for ASAP.
for CZPT ICA Automobile |
|||
for BUICK/CADILLAC |
for CHRYSLER |
||
CARDONE |
OE |
CARDONE |
OE |
65-one thousand |
22829136 |
sixty five-9196 |
52123196AA |
sixty five-9353 |
15036982 |
65-3014 |
4593679AC |
65-1011 |
15957127 |
sixty five-9195 |
52853017AB |
sixty five-9361 |
22845694 |
65-3013 |
52853017AF |
65-1571 |
25822589 |
65-3015 |
52123197AA |
for JEEP |
for CHEVY/CHEVROLET |
||
CARDONE |
OE |
CARDONE |
OE |
sixty five-9766 |
52111597AA |
sixty five-9146 |
15113831 |
65-9779 |
52123558AA |
sixty five-9145 |
15763590 |
sixty five-9669 |
52853346AD |
65-9359 |
15011500 |
65-9773 |
52853321AC |
65-9348 |
15114531 |
65-9761 |
52105884AA |
sixty five-9351 |
19259831 |
65-9771 |
5215718AC |
sixty five-9336 |
19152721 |
65-9765 |
5215716AE |
65-9344 |
15571402 |
sixty five-9315 |
52123514AD |
sixty five-9338 |
1515718 |
sixty five-9764 |
52853646AC |
sixty five-9827 |
15 0571 53 |
65-9326 |
52123627A |
65-9528 |
fifteen 0571 ninety five |
sixty five-9767 |
52853119AC |
65-9333 |
15719954 |
65-3005 |
52853329AB |
sixty five-9306 |
15769055 |
sixty five-3018 |
5257198AD |
sixty five-9347 |
25976620 |
sixty five-9324 |
52123612AC |
sixty five-9369 |
15016994 |
65-9313 |
22713657 |
65-9337 |
15016993 |
65-9776 |
52853432AA |
sixty five-9339 |
10382040 |
65-9820 |
5257186AC |
65-9346 |
15571431 |
sixty five-3007 |
5215718AC |
65-9329 |
15271519 |
65-9751 |
68571107AC |
65-9527 |
25775919 |
for FORD |
for DODGE |
||
CARDONE |
OE |
CARDONE |
OE |
sixty five-9451 |
F77A4376BB |
sixty five-9514 |
5215711AC |
65-9293 |
XL2Z4A376AA |
sixty five-9327 |
5215713AB |
65-9453 |
ZZR571100 |
65-9711 |
52853143AB |
sixty five-9112 |
8L3Z4R602B |
65-9103 |
5215711AE |
sixty five-9451 |
5L344K145TC |
sixty five-9197 |
4593857AB |
65-9293 |
5L344K145TD |
sixty five-9539 |
5273310AA |
sixty five-9792 |
XL2Z-4A376-AA |
sixty five-9541 |
9064104301 |
sixty five-9462 |
ZZR0-twenty five-a hundred |
65-9198 |
52853642AC |
sixty five-9400 |
1L2Z4A376AA |
65-9536 |
5305711 |
sixty five-9823 |
DL3Z4R602B |
65-9538 |
52123112AA |
sixty five-9440 |
6R3Z4602B |
65-9151 |
52853364AF |
65-9110 |
7A2Z4R602N |
65-9534 |
52105860AA |
65-9114 |
F75Z4A376BB |
sixty five-9319 |
52853363AB |
sixty five-9116 |
F81Z4A376PA |
sixty five-9537 |
52853363AE |
sixty five-9442 |
5C3Z4A376A |
65-9548 |
53006781 |
65-9443 |
BL8Z4R602A |
65-9701 |
680 0571 2AA |
for GMC/HUMMER |
|||
CARDONE |
OE |
CARDONE |
OE |
sixty five-9371 |
25776616 |
sixty five-9492 |
1 0571 298 |
for EUROPE Car |
|||
FOR AUDI/BMW |
for LAND ROVER/VOLVO/VW |
||
CARDONE |
OE |
CARDONE |
OE |
65-7011 |
2615711199 |
sixty five-9271 |
TVB000190 |
sixty five-7004 |
2615717355 |
657-050 |
TVB000040 |
65-7045 |
26101226417 |
65-7571 |
LR007035 |
sixty five-7058 |
26111226439 |
65-7012 |
3 0571 571 |
65-7061 |
26103457134 |
sixty five-7009 |
357110056 |
sixty five-7016 |
26203401609 |
sixty five-7571 |
7L6521101G |
sixty five-7018 |
7L57101D |
936-881 |
3 0571 566 |
sixty five-7019 |
7L57101H |
936-879 |
31256001 |
65-7571 |
4B57106C |
936-877 |
three 0571 272 |
sixty five-7048 |
4F57101F |
976-252 |
8689886 |
65-7055 |
4F57101B |
936-880 |
30783345 |
sixty five-7017 |
8R57101B |
936-876 |
three 0571 371 |
for MERCEDES |
|||
CARDONE |
OE |
CARDONE |
OE |
65-7041 |
9064157116 |
sixty five-7042 |
906415716 |
65-7002 |
9064104406 |
sixty five-7040 |
2E1521293 |
sixty five-7053 |
9064157116 |
65-7003 |
6394103606 |
936-337 |
1634100702 |
936-037 |
2044102601 |
936-321 |
6394107006 |
938-241 |
2514157102 |
for JAPAN Automobile |
|||
for ACURA/HONDA |
for SUBARU |
||
CARDONE |
OE |
CARDONE |
OE |
sixty five-4004 |
45710-S3V-A21 |
65-7013 |
27111-AG01A |
65-4002 |
45710-S3V-A22 |
65-7032 |
27111-AG05A |
65-4003 |
45710-TZ6-A21 |
sixty five-7005 |
27111-AG07A |
986~571-8822571/8822 0571 eight |
45710-S10-A01 |
12344543 |
27111-SC571 |
936-571 |
45710-S9A-E01 |
936-911 |
27111-AJ13D |
936-034 |
45710-S9A-J01 |
936-916 |
27101-84C00 |
for MITSUBISHI/NISSAN |
for CZPT TA |
||
CARDONE |
OE |
CARDONE |
OE |
65-3009 |
MR580626 |
65-5007 |
37140-35180 |
sixty five-6000 |
3401A571 |
sixty five-9842 |
37140-35040 |
65-9480 |
37000-JM14A |
sixty five-5571 |
37100-3D250 |
sixty five-9478 |
37000-S3805 |
65-5030 |
37100-34120 |
sixty five-6004 |
37000-S4203 |
sixty five-9265 |
37110-3D070 |
sixty five-6571 |
37041-90062 |
sixty five-9376 |
37110-35880 |
936-262 |
37041-90014 |
sixty five-5571 |
37110-3D220 |
938-030 |
37300-F3600 |
sixty five-5571 |
37100-34111 |
936-363 |
37000-7C002 |
65-5018 |
37110-3D060 |
938-200 |
37000-7C001 |
sixty five-5012 |
37100-5712 |
for CZPT Auto |
|||
for HYUNDAI/KIA |
|||
CARDONE |
OE |
CARDONE |
OE |
65-3502 |
49571-H1031 |
936-211 |
49100-3E450 |
65-3503 |
49300-2S000 |
936-210 |
49100-3E400 |
sixty five-3500 |
49300-0L000 |
936-two hundred |
49300-2P500 |
KOWA is a unique brand concentrate on Propeller shaft main for CZPT ica and CZPT pe market.
It is a model designed by NINGBNO CZPT CZPT CZPT Co.,ltd, who has been production
and trading all kinds of automobile elements for a lot more than ten years.
KOWA model with 1 year quality assurance at the factory value by MOQ 5pcs
china wholesaler Densen Customized Super Large Stainless Steel Forging Transmission Shaft, Transmission Drive Shaft, Transmission Main Shaft manufacturers
Item Description
Densen CZPT ized CZPT huge stainless steel forging transmission major shaft
We have specialists to fix your inquiries, make sure you get in touch with us straight!
Product Description
Description |
Levelling toes or machine feet |
Type |
Metal Nickel plated levelling feet |
Software |
Objects like equipment and home furniture |
Material |
metal |
Layout Support |
Pro-E, UG,SolidWorks,AutoCad, PDF |
High quality Control |
Substance, Dimension,Overall performance,within flaws,Balance check |
Standard |
ASTM,DIN,JIS,ISO,GB requirements |
Goods show:
Declaration:
Merchandise shown herein are made to the needs of certain CZPT ers and are illustrative of the kinds of manufacturing abilities CZPT in CZPT team of organizations.Our coverage is that CZPT e of these products will be marketed to third get-togethers without having created consent of the CZPT ers to whom the tooling, design and technical specs belong.
Firm Details
HangZhou New CZPT CZPT and Forging Firm is the sales organization of HangZhou CZPT CZPT of Companies. Features of New CZPT just summarized as beneath:
1. CZPT ed provider of metal, iron & CZPT -ferrous parts
two. Extensive documented good quality program in spot.
3. CZPT s, forgings, stampings, machining, welding & fabrication services.
4. 9 relevant factories, more than 50 joint-enterprise sub-contractors.
five. 25+ many years of production encounters, ten+ years of exporting knowledge
6. one hundred% of products bought to abroad CZPT ers.
seven. 50% of CZPT er base is forturne five hundred firms.
Processing assist
Casting Provider:
Casting is a manufacturing process in which a liquid content is normally poured into a mold, which contains a hollow cavity of the sought after shape, and then allowed to solidify.
New CZPT offers numerous expenditure casting, sand casting, permanent casting, die casting, lower force casting, ESR casting, misplaced foam casting, and so forth. Material can be managed contain steel, iron, CZPT -ferrous. One element bodyweight selection is from .01Kg to a hundred and fifty tons individually.
Forging Provider:
Forging is a manufacturing process involving the shaping of metal using localized compressive forces. New CZPT provides open die forging, closed die forging and ring forging companies. Substance can be steel, iron and CZPT -ferrous. Material can be dealt with include metal, iron, CZPT -ferrous. One element bodyweight range is from 0.1Kg to fifty,000Kgs.
Stamping Support:
Stamping (also identified as punching) is the procedure of placing flat sheet metal in either blank or coil sort into a stamping press where a instrument and die surface varieties the metallic into a internet condition.
New CZPT -XBL has much more than 60 sets stamping equipments, is the created supplier for numerous CZPT bands automotive firms, has the full potential to offer you entire procedures from blanking, stamping, welding, to electrostatic spraying for CZPT CZPT ers.
Welding & Fabrication Service:
Welding Frabrication is the fabrication procedure of metal structures by reducing, bending, then assembling the elements jointly via welding
New CZPT offers manual arc welding ,laser welding and robotic welding etc. UT, MPT,RT,PT all are CZPT used for inspection, WPS &PQR (Welding Method Specification& Process Qualification CZPT rds) prior to generation is CZPT below clients’ prerequisite.
Machining Service:
Machining is any of CZPT procedures in which a piece of uncooked materials is reduce into a preferred ultimate condition and size by a controlled substance-removal procedure.
New CZPT -XBL has more than sixty sets precision devices incl. CNC center, dull, milling, lathing, and so forth., and a lot more than three hundred inspection devices incl. 3 sets CMM with grade μm. Repeated tolerance can be managed as .02mm. In the meantime awarded by certificates ISO9001-2008 ISO/TS16949. New CZPT -XBL specialized in large exact machining for tiny-center-big metal elements.
3rd Social gathering Inspection:
New CZPT worked as 3rd celebration inspection centre aside from its sister factories or sub-contractors’ self inspection, Gives method inspection, random inspection and before delivedry inspection solutions for material, mechanical, inside flaws, dimentional, force, load, harmony, floor remedy, visual inspection and examination. Weekly task stick to-up report jointly with photographs and films, full quality inspection documentation CZPT .
New CZPT also designed as third social gathering inspection consultant for several CZPT ers when their items produced by other suppliers.
Software:
Contact us
china wholesaler 26111229557 for BMW 323ci 325I Rear Drive Shaft / Driveshaft / Propeller Shaft Main Sell to America Market +600 Items manufacturers
Solution Description
OEM |
26203401609 2625716571 2625717649 2625719985 2625718629 much more |
Application |
for BMW X3 325I x5 e53 3 4 5 6 7 sequence |
As a expert company for propeller shaft, we have +600 objects for all kinds of automobile, major appropriate
for The usa & EUROPE market place.
Our gain:
one. Complete selection of goods
two. MOQ qty: 5pcs/things
3. Shipping on time
4: Warranty: 1 Yr
five. Develope new things: Totally free
For some items, we have inventory, so tiny get (+5000USD) is welcome.
The pursuing objects are some of CZPT products, If you require more information, pls speak to us for ASAP.
for CZPT ICA Automobile |
|||
for BUICK/CADILLAC |
for CHRYSLER |
||
CARDONE |
OE |
CARDONE |
OE |
sixty five-one thousand |
22829136 |
sixty five-9196 |
52123196AA |
65-9353 |
15036982 |
65-3014 |
4593679AC |
sixty five-1011 |
15957127 |
65-9195 |
52853017AB |
65-9361 |
22845694 |
65-3013 |
52853017AF |
sixty five-1571 |
25822589 |
65-3015 |
52123197AA |
for JEEP |
for CHEVY/CHEVROLET |
||
CARDONE |
OE |
CARDONE |
OE |
sixty five-9766 |
52111597AA |
65-9146 |
15113831 |
65-9779 |
52123558AA |
sixty five-9145 |
15763590 |
65-9669 |
52853346AD |
65-9359 |
15011500 |
65-9773 |
52853321AC |
65-9348 |
15114531 |
65-9761 |
52105884AA |
sixty five-9351 |
19259831 |
sixty five-9771 |
5215718AC |
sixty five-9336 |
19152721 |
sixty five-9765 |
5215716AE |
65-9344 |
15571402 |
65-9315 |
52123514AD |
sixty five-9338 |
1515718 |
sixty five-9764 |
52853646AC |
65-9827 |
15 0571 fifty three |
65-9326 |
52123627A |
sixty five-9528 |
15 0571 95 |
65-9767 |
52853119AC |
sixty five-9333 |
15719954 |
65-3005 |
52853329AB |
65-9306 |
15769055 |
65-3018 |
5257198AD |
65-9347 |
25976620 |
sixty five-9324 |
52123612AC |
sixty five-9369 |
15016994 |
65-9313 |
22713657 |
sixty five-9337 |
15016993 |
65-9776 |
52853432AA |
sixty five-9339 |
10382040 |
sixty five-9820 |
5257186AC |
65-9346 |
15571431 |
65-3007 |
5215718AC |
sixty five-9329 |
15271519 |
65-9751 |
68571107AC |
65-9527 |
25775919 |
for FORD |
for DODGE |
||
CARDONE |
OE |
CARDONE |
OE |
65-9451 |
F77A4376BB |
sixty five-9514 |
5215711AC |
sixty five-9293 |
XL2Z4A376AA |
sixty five-9327 |
5215713AB |
sixty five-9453 |
ZZR571100 |
65-9711 |
52853143AB |
65-9112 |
8L3Z4R602B |
sixty five-9103 |
5215711AE |
65-9451 |
5L344K145TC |
65-9197 |
4593857AB |
sixty five-9293 |
5L344K145TD |
sixty five-9539 |
5273310AA |
65-9792 |
XL2Z-4A376-AA |
65-9541 |
9064104301 |
65-9462 |
ZZR0-twenty five-a hundred |
sixty five-9198 |
52853642AC |
sixty five-9400 |
1L2Z4A376AA |
sixty five-9536 |
5305711 |
sixty five-9823 |
DL3Z4R602B |
sixty five-9538 |
52123112AA |
65-9440 |
6R3Z4602B |
65-9151 |
52853364AF |
sixty five-9110 |
7A2Z4R602N |
65-9534 |
52105860AA |
sixty five-9114 |
F75Z4A376BB |
sixty five-9319 |
52853363AB |
sixty five-9116 |
F81Z4A376PA |
sixty five-9537 |
52853363AE |
sixty five-9442 |
5C3Z4A376A |
65-9548 |
53006781 |
sixty five-9443 |
BL8Z4R602A |
sixty five-9701 |
680 0571 2AA |
for GMC/HUMMER |
|||
CARDONE |
OE |
CARDONE |
OE |
sixty five-9371 |
25776616 |
65-9492 |
one 0571 298 |
for EUROPE Car |
|||
FOR AUDI/BMW |
for LAND ROVER/VOLVO/VW |
||
CARDONE |
OE |
CARDONE |
OE |
sixty five-7011 |
2615711199 |
sixty five-9271 |
TVB000190 |
sixty five-7004 |
2615717355 |
657-050 |
TVB000040 |
65-7045 |
26101226417 |
65-7571 |
LR007035 |
sixty five-7058 |
26111226439 |
65-7012 |
three 0571 571 |
sixty five-7061 |
26103457134 |
65-7009 |
357110056 |
65-7016 |
26203401609 |
65-7571 |
7L6521101G |
65-7018 |
7L57101D |
936-881 |
3 0571 566 |
sixty five-7019 |
7L57101H |
936-879 |
31256001 |
sixty five-7571 |
4B57106C |
936-877 |
three 0571 272 |
65-7048 |
4F57101F |
976-252 |
8689886 |
65-7055 |
4F57101B |
936-880 |
30783345 |
sixty five-7017 |
8R57101B |
936-876 |
3 0571 371 |
for MERCEDES |
|||
CARDONE |
OE |
CARDONE |
OE |
sixty five-7041 |
9064157116 |
65-7042 |
906415716 |
65-7002 |
9064104406 |
65-7040 |
2E1521293 |
sixty five-7053 |
9064157116 |
sixty five-7003 |
6394103606 |
936-337 |
1634100702 |
936-037 |
2044102601 |
936-321 |
6394107006 |
938-241 |
2514157102 |
for JAPAN Automobile |
|||
for ACURA/HONDA |
for SUBARU |
||
CARDONE |
OE |
CARDONE |
OE |
sixty five-4004 |
45710-S3V-A21 |
65-7013 |
27111-AG01A |
65-4002 |
45710-S3V-A22 |
65-7032 |
27111-AG05A |
65-4003 |
45710-TZ6-A21 |
sixty five-7005 |
27111-AG07A |
986~571-8822571/8822 0571 8 |
45710-S10-A01 |
12344543 |
27111-SC571 |
936-571 |
45710-S9A-E01 |
936-911 |
27111-AJ13D |
936-034 |
45710-S9A-J01 |
936-916 |
27101-84C00 |
for MITSUBISHI/NISSAN |
for CZPT TA |
||
CARDONE |
OE |
CARDONE |
OE |
65-3009 |
MR580626 |
sixty five-5007 |
37140-35180 |
sixty five-6000 |
3401A571 |
65-9842 |
37140-35040 |
65-9480 |
37000-JM14A |
65-5571 |
37100-3D250 |
65-9478 |
37000-S3805 |
sixty five-5030 |
37100-34120 |
65-6004 |
37000-S4203 |
sixty five-9265 |
37110-3D070 |
65-6571 |
37041-90062 |
65-9376 |
37110-35880 |
936-262 |
37041-90014 |
65-5571 |
37110-3D220 |
938-030 |
37300-F3600 |
sixty five-5571 |
37100-34111 |
936-363 |
37000-7C002 |
sixty five-5018 |
37110-3D060 |
938-200 |
37000-7C001 |
sixty five-5012 |
37100-5712 |
for CZPT Car |
|||
for HYUNDAI/KIA |
|||
CARDONE |
OE |
CARDONE |
OE |
sixty five-3502 |
49571-H1031 |
936-211 |
49100-3E450 |
65-3503 |
49300-2S000 |
936-210 |
49100-3E400 |
sixty five-3500 |
49300-0L000 |
936-two hundred |
49300-2P500 |
KOWA is a unique model concentrate on Propeller shaft major for CZPT ica and CZPT pe marketplace.
It is a brand designed by NINGBNO CZPT CZPT CZPT Co.,ltd, who has been manufacturing
and trading all types of car components for a lot more than 10 years.
KOWA model with 1 year quality assurance at the manufacturing unit price by MOQ 5pcs
china shop Rear Drive Shaft / Driveshaft / Propeller Shaft for BMW X3 26107564736 Main Sell to America Market +600 Items manufacturers
Item Description
OEM |
26203401609 2625716571 2625717649 2625719985 2625718629 more |
Software |
for BMW X3 325I x5 e53 3 4 5 6 7 series |
As a expert producer for propeller shaft, we have +600 objects for all kinds of auto, principal ideal
for The united states & EUROPE marketplace.
Our benefit:
1. Total range of items
two. MOQ qty: 5pcs/items
3. Shipping and delivery on time
four: Warranty: 1 Yr
5. Develope new things: Free
For some products, we have stock, so tiny buy (+5000USD) is welcome.
The subsequent objects are some of CZPT goods, If you want much more information, pls get in touch with us for ASAP.
for CZPT ICA Vehicle |
|||
for BUICK/CADILLAC |
for CHRYSLER |
||
CARDONE |
OE |
CARDONE |
OE |
sixty five-one thousand |
22829136 |
65-9196 |
52123196AA |
sixty five-9353 |
15036982 |
65-3014 |
4593679AC |
65-1011 |
15957127 |
sixty five-9195 |
52853017AB |
sixty five-9361 |
22845694 |
65-3013 |
52853017AF |
65-1571 |
25822589 |
65-3015 |
52123197AA |
for JEEP |
for CHEVY/CHEVROLET |
||
CARDONE |
OE |
CARDONE |
OE |
65-9766 |
52111597AA |
65-9146 |
15113831 |
sixty five-9779 |
52123558AA |
65-9145 |
15763590 |
sixty five-9669 |
52853346AD |
sixty five-9359 |
15011500 |
sixty five-9773 |
52853321AC |
65-9348 |
15114531 |
sixty five-9761 |
52105884AA |
65-9351 |
19259831 |
65-9771 |
5215718AC |
65-9336 |
19152721 |
sixty five-9765 |
5215716AE |
65-9344 |
15571402 |
65-9315 |
52123514AD |
65-9338 |
1515718 |
65-9764 |
52853646AC |
sixty five-9827 |
15 0571 53 |
sixty five-9326 |
52123627A |
65-9528 |
15 0571 ninety five |
sixty five-9767 |
52853119AC |
sixty five-9333 |
15719954 |
sixty five-3005 |
52853329AB |
65-9306 |
15769055 |
sixty five-3018 |
5257198AD |
sixty five-9347 |
25976620 |
65-9324 |
52123612AC |
65-9369 |
15016994 |
sixty five-9313 |
22713657 |
sixty five-9337 |
15016993 |
sixty five-9776 |
52853432AA |
65-9339 |
10382040 |
sixty five-9820 |
5257186AC |
65-9346 |
15571431 |
65-3007 |
5215718AC |
sixty five-9329 |
15271519 |
65-9751 |
68571107AC |
65-9527 |
25775919 |
for FORD |
for DODGE |
||
CARDONE |
OE |
CARDONE |
OE |
65-9451 |
F77A4376BB |
sixty five-9514 |
5215711AC |
65-9293 |
XL2Z4A376AA |
sixty five-9327 |
5215713AB |
sixty five-9453 |
ZZR571100 |
sixty five-9711 |
52853143AB |
sixty five-9112 |
8L3Z4R602B |
sixty five-9103 |
5215711AE |
sixty five-9451 |
5L344K145TC |
65-9197 |
4593857AB |
sixty five-9293 |
5L344K145TD |
sixty five-9539 |
5273310AA |
sixty five-9792 |
XL2Z-4A376-AA |
65-9541 |
9064104301 |
65-9462 |
ZZR0-25-a hundred |
65-9198 |
52853642AC |
65-9400 |
1L2Z4A376AA |
65-9536 |
5305711 |
65-9823 |
DL3Z4R602B |
sixty five-9538 |
52123112AA |
sixty five-9440 |
6R3Z4602B |
sixty five-9151 |
52853364AF |
sixty five-9110 |
7A2Z4R602N |
sixty five-9534 |
52105860AA |
65-9114 |
F75Z4A376BB |
65-9319 |
52853363AB |
sixty five-9116 |
F81Z4A376PA |
65-9537 |
52853363AE |
65-9442 |
5C3Z4A376A |
sixty five-9548 |
53006781 |
65-9443 |
BL8Z4R602A |
65-9701 |
680 0571 2AA |
for GMC/HUMMER |
|||
CARDONE |
OE |
CARDONE |
OE |
sixty five-9371 |
25776616 |
65-9492 |
one 0571 298 |
for EUROPE Automobile |
|||
FOR AUDI/BMW |
for LAND ROVER/VOLVO/VW |
||
CARDONE |
OE |
CARDONE |
OE |
sixty five-7011 |
2615711199 |
sixty five-9271 |
TVB000190 |
sixty five-7004 |
2615717355 |
657-050 |
TVB000040 |
sixty five-7045 |
26101226417 |
sixty five-7571 |
LR007035 |
sixty five-7058 |
26111226439 |
65-7012 |
3 0571 571 |
65-7061 |
26103457134 |
sixty five-7009 |
357110056 |
65-7016 |
26203401609 |
65-7571 |
7L6521101G |
sixty five-7018 |
7L57101D |
936-881 |
3 0571 566 |
65-7019 |
7L57101H |
936-879 |
31256001 |
65-7571 |
4B57106C |
936-877 |
three 0571 272 |
65-7048 |
4F57101F |
976-252 |
8689886 |
65-7055 |
4F57101B |
936-880 |
30783345 |
65-7017 |
8R57101B |
936-876 |
three 0571 371 |
for MERCEDES |
|||
CARDONE |
OE |
CARDONE |
OE |
65-7041 |
9064157116 |
65-7042 |
906415716 |
sixty five-7002 |
9064104406 |
65-7040 |
2E1521293 |
65-7053 |
9064157116 |
65-7003 |
6394103606 |
936-337 |
1634100702 |
936-037 |
2044102601 |
936-321 |
6394107006 |
938-241 |
2514157102 |
for JAPAN Car |
|||
for ACURA/HONDA |
for SUBARU |
||
CARDONE |
OE |
CARDONE |
OE |
65-4004 |
45710-S3V-A21 |
sixty five-7013 |
27111-AG01A |
65-4002 |
45710-S3V-A22 |
sixty five-7032 |
27111-AG05A |
sixty five-4003 |
45710-TZ6-A21 |
sixty five-7005 |
27111-AG07A |
986~571-8822571/8822 0571 eight |
45710-S10-A01 |
12344543 |
27111-SC571 |
936-571 |
45710-S9A-E01 |
936-911 |
27111-AJ13D |
936-034 |
45710-S9A-J01 |
936-916 |
27101-84C00 |
for MITSUBISHI/NISSAN |
for CZPT TA |
||
CARDONE |
OE |
CARDONE |
OE |
sixty five-3009 |
MR580626 |
sixty five-5007 |
37140-35180 |
sixty five-6000 |
3401A571 |
sixty five-9842 |
37140-35040 |
65-9480 |
37000-JM14A |
65-5571 |
37100-3D250 |
65-9478 |
37000-S3805 |
65-5030 |
37100-34120 |
sixty five-6004 |
37000-S4203 |
sixty five-9265 |
37110-3D070 |
65-6571 |
37041-90062 |
65-9376 |
37110-35880 |
936-262 |
37041-90014 |
65-5571 |
37110-3D220 |
938-030 |
37300-F3600 |
65-5571 |
37100-34111 |
936-363 |
37000-7C002 |
sixty five-5018 |
37110-3D060 |
938-200 |
37000-7C001 |
sixty five-5012 |
37100-5712 |
for CZPT Auto |
|||
for HYUNDAI/KIA |
|||
CARDONE |
OE |
CARDONE |
OE |
sixty five-3502 |
49571-H1031 |
936-211 |
49100-3E450 |
sixty five-3503 |
49300-2S000 |
936-210 |
49100-3E400 |
65-3500 |
49300-0L000 |
936-two hundred |
49300-2P500 |
KOWA is a unique brand emphasis on Propeller shaft principal for CZPT ica and CZPT pe marketplace.
It is a manufacturer designed by NINGBNO CZPT CZPT CZPT Co.,ltd, who has been manufacturing
and investing all types of auto areas for much more than ten many years.
KOWA manufacturer with 1 calendar year high quality assurance at the factory price by MOQ 5pcs
china shop Front Rear Propeller Shaft / Drive Shaft / Driveshaft for Jeep Commander / Liberty / Cherokee / Wrangler Main for America Market manufacturers
Merchandise Description
Propeller Shaft for JEEP |
|||
OEM |
Software |
OEM |
Software |
65-9820 |
for JEEP Cherokee |
52111597AA |
for JEEP Liberty |
530 0571 2AC |
for JEEP Cherokee |
sixty five-9326 |
for JEEP Liberty |
5215710AD/ 5215710AB |
for JEEP Commander |
65-3002 |
for JEEP Patriot |
52853431AA |
for JEEP Commander |
sixty five-9766 |
for JEEP CZPT |
5273310AB |
for JEEP CZPT |
sixty five-9765 |
for JEEP CZPT |
52853641AD |
for JEEP Durango |
65-9315 |
for JEEP CZPT |
52853642AD |
for JEEP Durango |
sixty five-9316 |
for JEEP CZPT |
sixty five-9767 |
for JEEP CZPT Cherokee |
68060040AA |
for JEEP CZPT Cherokee |
5215718AE |
for JEEP CZPT Cherokee |
52853646AE |
for JEEP CZPT Cherokee |
For more products pls get in touch with us |
As a specialist manufacturer for propeller shaft, we have +600 products for all sorts of automobile, main suitable
for The usa & EUROPE industry.
Our edge:
one. Complete range of items
two. MOQ qty: 5pcs/items
3. Shipping and delivery on time
four: Guarantee: 1 Calendar year
five. Develope new objects: Cost-free
For some items, we have inventory, so little buy (+5000USD) is welcome.
The following products are some of CZPT merchandise, If you require far more info, pls get in touch with us for ASAP.
for CZPT ICA Auto |
|||
for BUICK/CADILLAC |
for CHRYSLER |
||
CARDONE |
OE |
CARDONE |
OE |
sixty five-a thousand |
22829136 |
sixty five-9196 |
52123196AA |
65-9353 |
15036982 |
65-3014 |
4593679AC |
65-1011 |
15957127 |
sixty five-9195 |
52853017AB |
sixty five-9361 |
22845694 |
sixty five-3013 |
52853017AF |
sixty five-1571 |
25822589 |
sixty five-3015 |
52123197AA |
for JEEP |
for CHEVY/CHEVROLET |
||
CARDONE |
OE |
CARDONE |
OE |
sixty five-9766 |
52111597AA |
sixty five-9146 |
15113831 |
65-9779 |
52123558AA |
65-9145 |
15763590 |
sixty five-9669 |
52853346AD |
sixty five-9359 |
15011500 |
sixty five-9773 |
52853321AC |
sixty five-9348 |
15114531 |
sixty five-9761 |
52105884AA |
65-9351 |
19259831 |
65-9771 |
5215718AC |
65-9336 |
19152721 |
sixty five-9765 |
5215716AE |
65-9344 |
15571402 |
65-9315 |
52123514AD |
sixty five-9338 |
1515718 |
65-9764 |
52853646AC |
65-9827 |
15 0571 53 |
65-9326 |
52123627A |
sixty five-9528 |
15 0571 ninety five |
sixty five-9767 |
52853119AC |
65-9333 |
15719954 |
sixty five-3005 |
52853329AB |
sixty five-9306 |
15769055 |
sixty five-3018 |
5257198AD |
65-9347 |
25976620 |
65-9324 |
52123612AC |
sixty five-9369 |
15016994 |
65-9313 |
22713657 |
65-9337 |
15016993 |
65-9776 |
52853432AA |
sixty five-9339 |
10382040 |
65-9820 |
5257186AC |
65-9346 |
15571431 |
sixty five-3007 |
5215718AC |
sixty five-9329 |
15271519 |
sixty five-9751 |
68571107AC |
65-9527 |
25775919 |
for FORD |
for DODGE |
||
CARDONE |
OE |
CARDONE |
OE |
65-9451 |
F77A4376BB |
sixty five-9514 |
5215711AC |
65-9293 |
XL2Z4A376AA |
65-9327 |
5215713AB |
65-9453 |
ZZR571100 |
65-9711 |
52853143AB |
sixty five-9112 |
8L3Z4R602B |
65-9103 |
5215711AE |
sixty five-9451 |
5L344K145TC |
65-9197 |
4593857AB |
sixty five-9293 |
5L344K145TD |
sixty five-9539 |
5273310AA |
65-9792 |
XL2Z-4A376-AA |
65-9541 |
9064104301 |
sixty five-9462 |
ZZR0-25-100 |
65-9198 |
52853642AC |
65-9400 |
1L2Z4A376AA |
65-9536 |
5305711 |
sixty five-9823 |
DL3Z4R602B |
sixty five-9538 |
52123112AA |
65-9440 |
6R3Z4602B |
65-9151 |
52853364AF |
sixty five-9110 |
7A2Z4R602N |
sixty five-9534 |
52105860AA |
65-9114 |
F75Z4A376BB |
sixty five-9319 |
52853363AB |
65-9116 |
F81Z4A376PA |
sixty five-9537 |
52853363AE |
65-9442 |
5C3Z4A376A |
65-9548 |
53006781 |
65-9443 |
BL8Z4R602A |
sixty five-9701 |
680 0571 2AA |
for GMC/HUMMER |
|||
CARDONE |
OE |
CARDONE |
OE |
sixty five-9371 |
25776616 |
sixty five-9492 |
one 0571 298 |
for EUROPE Vehicle |
|||
FOR AUDI/BMW |
for LAND ROVER/VOLVO/VW |
||
CARDONE |
OE |
CARDONE |
OE |
sixty five-7011 |
2615711199 |
sixty five-9271 |
TVB000190 |
65-7004 |
2615717355 |
657-050 |
TVB000040 |
65-7045 |
26101226417 |
sixty five-7571 |
LR007035 |
65-7058 |
26111226439 |
65-7012 |
three 0571 571 |
sixty five-7061 |
26103457134 |
sixty five-7009 |
357110056 |
65-7016 |
26203401609 |
65-7571 |
7L6521101G |
65-7018 |
7L57101D |
936-881 |
three 0571 566 |
sixty five-7019 |
7L57101H |
936-879 |
31256001 |
sixty five-7571 |
4B57106C |
936-877 |
three 0571 272 |
sixty five-7048 |
4F57101F |
976-252 |
8689886 |
65-7055 |
4F57101B |
936-880 |
30783345 |
65-7017 |
8R57101B |
936-876 |
3 0571 371 |
for MERCEDES |
|||
CARDONE |
OE |
CARDONE |
OE |
sixty five-7041 |
9064157116 |
sixty five-7042 |
906415716 |
65-7002 |
9064104406 |
65-7040 |
2E1521293 |
sixty five-7053 |
9064157116 |
sixty five-7003 |
6394103606 |
936-337 |
1634100702 |
936-037 |
2044102601 |
936-321 |
6394107006 |
938-241 |
2514157102 |
for JAPAN Auto |
|||
for ACURA/HONDA |
for SUBARU |
||
CARDONE |
OE |
CARDONE |
OE |
65-4004 |
45710-S3V-A21 |
sixty five-7013 |
27111-AG01A |
sixty five-4002 |
45710-S3V-A22 |
65-7032 |
27111-AG05A |
65-4003 |
45710-TZ6-A21 |
65-7005 |
27111-AG07A |
986~571-8822571/8822 0571 8 |
45710-S10-A01 |
12344543 |
27111-SC571 |
936-571 |
45710-S9A-E01 |
936-911 |
27111-AJ13D |
936-034 |
45710-S9A-J01 |
936-916 |
27101-84C00 |
for MITSUBISHI/NISSAN |
for CZPT TA |
||
CARDONE |
OE |
CARDONE |
OE |
65-3009 |
MR580626 |
sixty five-5007 |
37140-35180 |
sixty five-6000 |
3401A571 |
65-9842 |
37140-35040 |
65-9480 |
37000-JM14A |
sixty five-5571 |
37100-3D250 |
65-9478 |
37000-S3805 |
sixty five-5030 |
37100-34120 |
sixty five-6004 |
37000-S4203 |
65-9265 |
37110-3D070 |
sixty five-6571 |
37041-90062 |
sixty five-9376 |
37110-35880 |
936-262 |
37041-90014 |
sixty five-5571 |
37110-3D220 |
938-030 |
37300-F3600 |
sixty five-5571 |
37100-34111 |
936-363 |
37000-7C002 |
sixty five-5018 |
37110-3D060 |
938-two hundred |
37000-7C001 |
sixty five-5012 |
37100-5712 |
for CZPT Car |
|||
for HYUNDAI/KIA |
|||
CARDONE |
OE |
CARDONE |
OE |
sixty five-3502 |
49571-H1031 |
936-211 |
49100-3E450 |
sixty five-3503 |
49300-2S000 |
936-210 |
49100-3E400 |
65-3500 |
49300-0L000 |
936-two hundred |
49300-2P500 |
KOWA is a particular manufacturer concentrate on Propeller shaft major for CZPT ica and CZPT pe industry.
It is a brand produced by NINGBNO CZPT CZPT CZPT Co.,ltd, who has been producing
and investing all types of auto elements for more than 10 a long time.
KOWA model with 1 year good quality assurance at the manufacturing unit cost by MOQ 5pcs