Product Description
CE Certificate Agricultural Machinery Potato Harvester Spare Parts Cardan Pto Drive Shaft and Farm Tractor Pto Shaft
Product Description
A Power Take-Off shaft (PTO shaft) is a mechanical device utilized to transmit power from a tractor or other power source to an attached implement, such as a mower, tiller, or baler. Typically situated at the rear of the tractor, the PTO shaft is driven by the tractor’s engine through the transmission.
The primary purpose of the PTO shaft is to supply a rotating power source to the implement, enabling it to carry out its intended function. To connect the implement to the PTO shaft, a universal joint is employed, allowing for movement between the tractor and the implement while maintaining a consistent power transfer.
Here is our advantages when compare to similar products from China:
1.Forged yokes make PTO shafts strong enough for usage and working;
2.Internal sizes standard to confirm installation smooth;
3.CE and ISO certificates to guarantee to quality of our goods;
4.Strong and professional package to confirm the good situation when you receive the goods.
Product Specifications
In farming, the most common way to transmit power from a tractor to an implement is by a driveline, connected to the PTO (Power Take Off) of the tractor to the IIC(Implement Input Connection). Drivelines are also commonly connected to shafts within the implement to transmit power to various mechanisms.
The following dimensions of the PTO types are available.
Type B:13/8″Z6(540 min)
Type D:13/8″Z21(1000 min)
Coupling a driveline to a PTO should be quick and simple because in normal use tractors must operate multiple implements. Consequently, yokes on the tractor-end of the driveline are fitted with a quick-disconnect system, such as push-pin or ball collar.
Specifications for a driveline, including the way it is coupled to a PTO, depend CZPT the implement.
Yokes on the llc side are rarely disconnected and may be fastened by quick-lock couplings (push-pin or ball collar).
Taper pins are the most stable connection for splined shafts and are commonly used in yokes and torque limiters. Taper pins are also often used to connect internal drive shafts on drivelines that are not frequently disconnected.
Torque limiter and clutches must always be installed on the implement side of the primary driveline.
Packaging & Shipping
Company Profile
HangZhou Hanon Technology Co.,ltd is a modern enterprise specilizing in the development,production,sales and services of Agricultural Parts like PTO shaft and Gearboxes and Hydraulic parts like Cylinder , Valve ,Gearpump and motor etc..
We adhere to the principle of ” High Quality, Customers’Satisfaction”, using advanced technology and equipments to ensure all the technical standards of transmission .We follow the principle of people first , trying our best to set up a pleasant surroundings and platform of performance for each employee. So everyone can be self-consciously active to join Hanon Machinery.
FAQ
1.What’re your main products?
we currently product Agricultural Parts like PTO shaft and Gearboxes and Hydraulic parts like Cylinder , Valve ,Gear pump and motor.You can check the specifications for above product on our website and you can email us to recommend needed product per your specification too.
2.What’s your warranty terms?
One year.
3.What’s the lead time for a regular order?
Generally speaking, our regular standard product will need 30-45days, a bit longer for customized products. But we are very flexible on the lead time, it will depend on the specific orders.
4.What’s the payment term?
When we quote for you,we will confirm with you the way of transaction,FOB,CIFetc.<br> For mass production goods, you need to pay 30% deposit before producing and70% balance against copy of documents.The most common way is by T/T.
5.Can you send me a price list?
For all of our product, they are customized based on different requirements like length, ratio,voltage,and power etc. The price also varies according to annual quantity. So it’s really difficult for us to provide a price list. If you can share your detailed requirements and annual quantity, we’ll see what offer we can provide.
6.How to deliver the goods to us?
Usually we will ship the goods to you by sea.
Other Products
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Type: | Agricultural Spare Part, Agricultural Spare Part |
|---|---|
| Usage: | Agricultural Products Processing, Farmland Infrastructure, Tillage, Harvester, Planting and Fertilization, Grain Threshing, Cleaning and Drying, Agricultural Machinery,Farm Tractor, Agricultural Products Processing, Farmland Infrastructure, Tillage, Harvester, Planting and Fertilization, Grain Threshing, Cleaning and Drying, Agricultural Machinery, Farm Tractor |
| Material: | Carbon Steel, 45cr Steel, Carbon Steel |
| Samples: |
US$ 20/Piece
1 Piece(Min.Order) | Order Sample |
|---|
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
How do manufacturers ensure the compatibility of drive shafts with different equipment?
Manufacturers employ various strategies and processes to ensure the compatibility of drive shafts with different equipment. Compatibility refers to the ability of a drive shaft to effectively integrate and function within a specific piece of equipment or machinery. Manufacturers take into account several factors to ensure compatibility, including dimensional requirements, torque capacity, operating conditions, and specific application needs. Here’s a detailed explanation of how manufacturers ensure the compatibility of drive shafts:
1. Application Analysis:
Manufacturers begin by conducting a thorough analysis of the intended application and equipment requirements. This analysis involves understanding the specific torque and speed demands, operating conditions (such as temperature, vibration levels, and environmental factors), and any unique characteristics or constraints of the equipment. By gaining a comprehensive understanding of the application, manufacturers can tailor the design and specifications of the drive shaft to ensure compatibility.
2. Customization and Design:
Manufacturers often offer customization options to adapt drive shafts to different equipment. This customization involves tailoring the dimensions, materials, joint configurations, and other parameters to match the specific requirements of the equipment. By working closely with the equipment manufacturer or end-user, manufacturers can design drive shafts that align with the equipment’s mechanical interfaces, mounting points, available space, and other constraints. Customization ensures that the drive shaft fits seamlessly into the equipment, promoting compatibility and optimal performance.
3. Torque and Power Capacity:
Drive shaft manufacturers carefully determine the torque and power capacity of their products to ensure compatibility with different equipment. They consider factors such as the maximum torque requirements of the equipment, the expected operating conditions, and the safety margins necessary to withstand transient loads. By engineering drive shafts with appropriate torque ratings and power capacities, manufacturers ensure that the shaft can handle the demands of the equipment without experiencing premature failure or performance issues.
4. Material Selection:
Manufacturers choose materials for drive shafts based on the specific needs of different equipment. Factors such as torque capacity, operating temperature, corrosion resistance, and weight requirements influence material selection. Drive shafts may be made from various materials, including steel, aluminum alloys, or specialized composites, to provide the necessary strength, durability, and performance characteristics. The selected materials ensure compatibility with the equipment’s operating conditions, load requirements, and other environmental factors.
5. Joint Configurations:
Drive shafts incorporate joint configurations, such as universal joints (U-joints) or constant velocity (CV) joints, to accommodate different equipment needs. Manufacturers select and design the appropriate joint configuration based on factors such as operating angles, misalignment tolerances, and the desired level of smooth power transmission. The choice of joint configuration ensures that the drive shaft can effectively transmit power and accommodate the range of motion required by the equipment, promoting compatibility and reliable operation.
6. Quality Control and Testing:
Manufacturers implement stringent quality control processes and testing procedures to verify the compatibility of drive shafts with different equipment. These processes involve conducting dimensional inspections, material testing, torque and stress analysis, and performance testing under simulated operating conditions. By subjecting drive shafts to rigorous quality control measures, manufacturers can ensure that they meet the required specifications and performance criteria, guaranteeing compatibility with the intended equipment.
7. Compliance with Standards:
Manufacturers ensure that their drive shafts comply with relevant industry standards and regulations. Compliance with standards, such as ISO (International Organization for Standardization) or specific industry standards, provides assurance of quality, safety, and compatibility. Adhering to these standards helps manufacturers meet the expectations and requirements of equipment manufacturers and end-users, ensuring that the drive shafts are compatible and can be seamlessly integrated into different equipment.
8. Collaboration and Feedback:
Manufacturers often collaborate closely with equipment manufacturers, OEMs (Original Equipment Manufacturers), or end-users to gather feedback and incorporate their specific requirements into the drive shaft design and manufacturing processes. This collaborative approach ensures that the drive shafts are compatible with the intended equipment and meet the expectations of the end-users. By actively seeking input and feedback, manufacturers can continuously improve their products’ compatibility and performance.
In summary, manufacturers ensure the compatibility of drive shafts with different equipment through a combination of application analysis, customization, torque and power capacity considerations, material selection, joint configurations, quality control and testing, compliance with standards, and collaboration with equipment manufacturers and end-users. These efforts enable manufacturers to design and produce drive shafts that seamlessly integrate with various equipment, ensuring optimal performance, reliability, and compatibility in different applications.
How do drive shafts contribute to the efficiency of vehicle propulsion and power transmission?
Drive shafts play a crucial role in the efficiency of vehicle propulsion and power transmission systems. They are responsible for transferring power from the engine or power source to the wheels or driven components. Here’s a detailed explanation of how drive shafts contribute to the efficiency of vehicle propulsion and power transmission:
1. Power Transfer:
Drive shafts transmit power from the engine or power source to the wheels or driven components. By efficiently transferring rotational energy, drive shafts enable the vehicle to move forward or drive the machinery. The design and construction of drive shafts ensure minimal power loss during the transfer process, maximizing the efficiency of power transmission.
2. Torque Conversion:
Drive shafts can convert torque from the engine or power source to the wheels or driven components. Torque conversion is necessary to match the power characteristics of the engine with the requirements of the vehicle or machinery. Drive shafts with appropriate torque conversion capabilities ensure that the power delivered to the wheels is optimized for efficient propulsion and performance.
3. Constant Velocity (CV) Joints:
Many drive shafts incorporate Constant Velocity (CV) joints, which help maintain a constant speed and efficient power transmission, even when the driving and driven components are at different angles. CV joints allow for smooth power transfer and minimize vibration or power losses that may occur due to changing operating angles. By maintaining constant velocity, drive shafts contribute to efficient power transmission and improved overall vehicle performance.
4. Lightweight Construction:
Efficient drive shafts are often designed with lightweight materials, such as aluminum or composite materials. Lightweight construction reduces the rotational mass of the drive shaft, which results in lower inertia and improved efficiency. Reduced rotational mass enables the engine to accelerate and decelerate more quickly, allowing for better fuel efficiency and overall vehicle performance.
5. Minimized Friction:
Efficient drive shafts are engineered to minimize frictional losses during power transmission. They incorporate features such as high-quality bearings, low-friction seals, and proper lubrication to reduce energy losses caused by friction. By minimizing friction, drive shafts enhance power transmission efficiency and maximize the available power for propulsion or operating other machinery.
6. Balanced and Vibration-Free Operation:
Drive shafts undergo dynamic balancing during the manufacturing process to ensure smooth and vibration-free operation. Imbalances in the drive shaft can lead to power losses, increased wear, and vibrations that reduce overall efficiency. By balancing the drive shaft, it can spin evenly, minimizing vibrations and optimizing power transmission efficiency.
7. Maintenance and Regular Inspection:
Proper maintenance and regular inspection of drive shafts are essential for maintaining their efficiency. Regular lubrication, inspection of joints and components, and prompt repair or replacement of worn or damaged parts help ensure optimal power transmission efficiency. Well-maintained drive shafts operate with minimal friction, reduced power losses, and improved overall efficiency.
8. Integration with Efficient Transmission Systems:
Drive shafts work in conjunction with efficient transmission systems, such as manual, automatic, or continuously variable transmissions. These transmissions help optimize power delivery and gear ratios based on driving conditions and vehicle speed. By integrating with efficient transmission systems, drive shafts contribute to the overall efficiency of the vehicle propulsion and power transmission system.
9. Aerodynamic Considerations:
In some cases, drive shafts are designed with aerodynamic considerations in mind. Streamlined drive shafts, often used in high-performance or electric vehicles, minimize drag and air resistance to improve overall vehicle efficiency. By reducing aerodynamic drag, drive shafts contribute to the efficient propulsion and power transmission of the vehicle.
10. Optimized Length and Design:
Drive shafts are designed to have optimal lengths and designs to minimize energy losses. Excessive drive shaft length or improper design can introduce additional rotational mass, increase bending stresses, and result in energy losses. By optimizing the length and design, drive shafts maximize power transmission efficiency and contribute to improved overall vehicle efficiency.
Overall, drive shafts contribute to the efficiency of vehicle propulsion and power transmission through effective power transfer, torque conversion, utilization of CV joints, lightweight construction, minimized friction, balanced operation, regular maintenance, integration with efficient transmission systems, aerodynamic considerations, and optimized length and design. By ensuring efficient power delivery and minimizing energy losses, drive shafts play a significant role in enhancing the overall efficiency and performance of vehicles and machinery.
Are there variations in drive shaft designs for different types of machinery?
Yes, there are variations in drive shaft designs to cater to the specific requirements of different types of machinery. The design of a drive shaft is influenced by factors such as the application, power transmission needs, space limitations, operating conditions, and the type of driven components. Here’s an explanation of how drive shaft designs can vary for different types of machinery:
1. Automotive Applications:
In the automotive industry, drive shaft designs can vary depending on the vehicle’s configuration. Rear-wheel-drive vehicles typically use a single-piece or two-piece drive shaft, which connects the transmission or transfer case to the rear differential. Front-wheel-drive vehicles often use a different design, employing a drive shaft that combines with the constant velocity (CV) joints to transmit power to the front wheels. All-wheel-drive vehicles may have multiple drive shafts to distribute power to all wheels. The length, diameter, material, and joint types can differ based on the vehicle’s layout and torque requirements.
2. Industrial Machinery:
Drive shaft designs for industrial machinery depend on the specific application and power transmission requirements. In manufacturing machinery, such as conveyors, presses, and rotating equipment, drive shafts are designed to transfer power efficiently within the machine. They may incorporate flexible joints or use a splined or keyed connection to accommodate misalignment or allow for easy disassembly. The dimensions, materials, and reinforcement of the drive shaft are selected based on the torque, speed, and operating conditions of the machinery.
3. Agriculture and Farming:
Agricultural machinery, such as tractors, combines, and harvesters, often requires drive shafts that can handle high torque loads and varying operating angles. These drive shafts are designed to transmit power from the engine to attachments and implements, such as mowers, balers, tillers, and harvesters. They may incorporate telescopic sections to accommodate adjustable lengths, flexible joints to compensate for misalignment during operation, and protective shielding to prevent entanglement with crops or debris.
4. Construction and Heavy Equipment:
Construction and heavy equipment, including excavators, loaders, bulldozers, and cranes, require robust drive shaft designs capable of transmitting power in demanding conditions. These drive shafts often have larger diameters and thicker walls to handle high torque loads. They may incorporate universal joints or CV joints to accommodate operating angles and absorb shocks and vibrations. Drive shafts in this category may also have additional reinforcements to withstand the harsh environments and heavy-duty applications associated with construction and excavation.
5. Marine and Maritime Applications:
Drive shaft designs for marine applications are specifically engineered to withstand the corrosive effects of seawater and the high torque loads encountered in marine propulsion systems. Marine drive shafts are typically made from stainless steel or other corrosion-resistant materials. They may incorporate flexible couplings or dampening devices to reduce vibration and mitigate the effects of misalignment. The design of marine drive shafts also considers factors such as shaft length, diameter, and support bearings to ensure reliable power transmission in marine vessels.
6. Mining and Extraction Equipment:
In the mining industry, drive shafts are used in heavy machinery and equipment such as mining trucks, excavators, and drilling rigs. These drive shafts need to withstand extremely high torque loads and harsh operating conditions. Drive shaft designs for mining applications often feature larger diameters, thicker walls, and specialized materials such as alloy steel or composite materials. They may incorporate universal joints or CV joints to handle operating angles, and they are designed to be resistant to abrasion and wear.
These examples highlight the variations in drive shaft designs for different types of machinery. The design considerations take into account factors such as power requirements, operating conditions, space constraints, alignment needs, and the specific demands of the machinery or industry. By tailoring the drive shaft design to the unique requirements of each application, optimal power transmission efficiency and reliability can be achieved.
editor by CX 2024-03-29
China High quality transmission pto drive shaft for agricultural tractor parts drive shaft coupling
Error:获取返回内容失败，
Your session has expired. Please reauthenticate.
Guide to Drive Shafts and U-Joints
If you’re concerned about the performance of your car’s driveshaft, you’re not alone. Many car owners are unaware of the warning signs of a failed driveshaft, but knowing what to look for can help you avoid costly repairs. Here is a brief guide on drive shafts, U-joints and maintenance intervals. Listed below are key points to consider before replacing a vehicle driveshaft.
Symptoms of Driveshaft Failure
Identifying a faulty driveshaft is easy if you’ve ever heard a strange noise from under your car. These sounds are caused by worn U-joints and bearings supporting the drive shaft. When they fail, the drive shafts stop rotating properly, creating a clanking or squeaking sound. When this happens, you may hear noise from the side of the steering wheel or floor.
In addition to noise, a faulty driveshaft can cause your car to swerve in tight corners. It can also lead to suspended bindings that limit overall control. Therefore, you should have these symptoms checked by a mechanic as soon as you notice them. If you notice any of the symptoms above, your next step should be to tow your vehicle to a mechanic. To avoid extra trouble, make sure you’ve taken precautions by checking your car’s oil level.
In addition to these symptoms, you should also look for any noise from the drive shaft. The first thing to look for is the squeak. This was caused by severe damage to the U-joint attached to the drive shaft. In addition to noise, you should also look for rust on the bearing cap seals. In extreme cases, your car can even shudder when accelerating.
Vibration while driving can be an early warning sign of a driveshaft failure. Vibration can be due to worn bushings, stuck sliding yokes, or even springs or bent yokes. Excessive torque can be caused by a worn center bearing or a damaged U-joint. The vehicle may make unusual noises in the chassis system.
If you notice these signs, it’s time to take your car to a mechanic. You should check regularly, especially heavy vehicles. If you’re not sure what’s causing the noise, check your car’s transmission, engine, and rear differential. If you suspect that a driveshaft needs to be replaced, a certified mechanic can replace the driveshaft in your car.
Drive shaft type
Driveshafts are used in many different types of vehicles. These include four-wheel drive, front-engine rear-wheel drive, motorcycles and boats. Each type of drive shaft has its own purpose. Below is an overview of the three most common types of drive shafts:
The driveshaft is a circular, elongated shaft that transmits torque from the engine to the wheels. Drive shafts often contain many joints to compensate for changes in length or angle. Some drive shafts also include connecting shafts and internal constant velocity joints. Some also include torsional dampers, spline joints, and even prismatic joints. The most important thing about the driveshaft is that it plays a vital role in transmitting torque from the engine to the wheels.
The drive shaft needs to be both light and strong to move torque. While steel is the most commonly used material for automotive driveshafts, other materials such as aluminum, composites, and carbon fiber are also commonly used. It all depends on the purpose and size of the vehicle. Precision Manufacturing is a good source for OEM products and OEM driveshafts. So when you’re looking for a new driveshaft, keep these factors in mind when buying.
Cardan joints are another common drive shaft. A universal joint, also known as a U-joint, is a flexible coupling that allows one shaft to drive the other at an angle. This type of drive shaft allows power to be transmitted while the angle of the other shaft is constantly changing. While a gimbal is a good option, it’s not a perfect solution for all applications.
CZPT, Inc. has state-of-the-art machinery to service all types of drive shafts, from small cars to race cars. They serve a variety of needs, including racing, industry and agriculture. Whether you need a new drive shaft or a simple adjustment, the staff at CZPT can meet all your needs. You’ll be back on the road soon!
U-joint
If your car yoke or u-joint shows signs of wear, it’s time to replace them. The easiest way to replace them is to follow the steps below. Use a large flathead screwdriver to test. If you feel any movement, the U-joint is faulty. Also, inspect the bearing caps for damage or rust. If you can’t find the u-joint wrench, try checking with a flashlight.
When inspecting U-joints, make sure they are properly lubricated and lubricated. If the joint is dry or poorly lubricated, it can quickly fail and cause your car to squeak while driving. Another sign that a joint is about to fail is a sudden, excessive whine. Check your u-joints every year or so to make sure they are in proper working order.
Whether your u-joint is sealed or lubricated will depend on the make and model of your vehicle. When your vehicle is off-road, you need to install lubricable U-joints for durability and longevity. A new driveshaft or derailleur will cost more than a U-joint. Also, if you don’t have a good understanding of how to replace them, you may need to do some transmission work on your vehicle.
When replacing the U-joint on the drive shaft, be sure to choose an OEM replacement whenever possible. While you can easily repair or replace the original head, if the u-joint is not lubricated, you may need to replace it. A damaged gimbal joint can cause problems with your car’s transmission or other critical components. Replacing your car’s U-joint early can ensure its long-term performance.
Another option is to use two CV joints on the drive shaft. Using multiple CV joints on the drive shaft helps you in situations where alignment is difficult or operating angles do not match. This type of driveshaft joint is more expensive and complex than a U-joint. The disadvantages of using multiple CV joints are additional length, weight, and reduced operating angle. There are many reasons to use a U-joint on a drive shaft.
maintenance interval
Checking U-joints and slip joints is a critical part of routine maintenance. Most vehicles are equipped with lube fittings on the driveshaft slip joint, which should be checked and lubricated at every oil change. CZPT technicians are well-versed in axles and can easily identify a bad U-joint based on the sound of acceleration or shifting. If not repaired properly, the drive shaft can fall off, requiring expensive repairs.
Oil filters and oil changes are other parts of a vehicle’s mechanical system. To prevent rust, the oil in these parts must be replaced. The same goes for transmission. Your vehicle’s driveshaft should be inspected at least every 60,000 miles. The vehicle’s transmission and clutch should also be checked for wear. Other components that should be checked include PCV valves, oil lines and connections, spark plugs, tire bearings, steering gearboxes and brakes.
If your vehicle has a manual transmission, it is best to have it serviced by CZPT’s East Lexington experts. These services should be performed every two to four years or every 24,000 miles. For best results, refer to the owner’s manual for recommended maintenance intervals. CZPT technicians are experienced in axles and differentials. Regular maintenance of your drivetrain will keep it in good working order.
editor by czh 2023-03-03
in Gold Coast Australia sales price shop near me near me shop factory supplier Quality Agricultural Tractor Parts Pto Shaft Lemon Tube for Farm Equipment manufacturer best Cost Custom Cheap wholesaler
Total use has been made of all varieties of advanced methods and technology to attain excelsior producing. There is a technical centre of province stage, EPG academician functioning station, experiment station for EPG post medical doctors, and nationwide 863 software set up in EPG group. With these platforms and sturdy complex ability, the a lot more than four hundred technicians have developed all selection of particular higher specific and large power items, executed mould packages for key components in the vehicle and countrywide sector revitalizing plan, ensuing far more than 5000 created over, among which 33 products are autonomous patent engineering with four patent accredited . With a lot of years’ knowledge in this line, we will be trustworthy by our benefits in aggressive price tag, one-time shipping, prompt reaction, on-hand engineering support and good after-income services.Additionally, all our production processes are in compliance with ISO9001 requirements.
EPTT agricultural tractor elements pto shaft lemon tube for farm gear
one. EPTs or EPTs
We have previously obtained Triangular profile tube and Lemon profile tube for all the series we supply.
And we have some star tube, splined tube and other profile tubes essential by our customers (for a specified collection). (Make sure you observe that our catalog doesnt include all the products we generate)
If you want tubes other than triangular or lemon, make sure you give drawings or photos.
2.Finish yokes
We’ve obtained numerous types of swift launch yokes and basic bore yoke. I will suggest the typical kind for your reference.
You can also send out drawings or images to us if you cannot find your item in our catalog.
3. Security devices or clutches
I will attach the details of protection devices for your reference. We have already have Totally free wheel (RA), Ratchet torque limiter(SA), Shear bolt torque limiter(SB), 3types of friction torque limiter (FF,FFS,FCS) and overrunning couplers(adapters) (FAS).
four.For any other far more EPTT needs with plastic guard, connection technique, coloration of painting, package, etc., remember to really feel free to allow me know.
Features:
one. We have been EPTTized in planning, production EPT shaft, steering coupler shaft, EPT joints, which have exported to the United states of america, Europe, Australia and so on for many years
two. Software to all types of EPTT mechanical circumstance
three. Our goods are of large depth and rigidity.
four. Heat resistant amp Acid resistant
five. OEM orders are welcomed
Our factory is a major producer of PTO shaft yoke and EPT joint.
We manufacture substantial high quality PTO yokes for various automobiles, design EPTTry and equipment. All goods are constructed with rotating lighter.
We are at present exporting our merchandise throughout the entire world, eEPTTly to North The united states, South The usa, Europe, and Russia. If you are fascinated in any merchandise, please do not wait to speak to us. We are searching EPTT to turning out to be your suppliers in the close to EPT.
in Tyumen Russian Federation sales price shop near me near me shop factory supplier Agricultural Tractor Spare Parts for Japanese Tractor manufacturer best Cost Custom Cheap wholesaler
EPG is a skilled maker and exporter that is anxious with the style, improvement and production. focus in electrical power transmission goods, CATV products, mechanical seal, hydraulic and Pheumatic, and promotional items. With EPG model registered in a lot more than 70 countries like The united states , Europe , Japan and so on, it has associates between world top enterprises, this sort of as JOHNDEERE, NEW HOLLAND, CLAAS, HONDA, KUBOTA, YANMAR, and so forth. We deveXiHu (West EPT) Dis.Hu (West EPT) Dis.ed and made several tractor spare elements for Japanese Tractors interval
The parts for illustration colon Tyres comma rim Jante comma Kit coupling KB-TX three stage linkage period Exhaust pipe Steering wheel period of time Kit coupling YM F14 solF15 comma PTO cardan comma Wheel rim comma Roll bar commabulb comma ligEPTT support comma contactor with key comma stickers comma bearing for clucth disc comma rubber pipe comma dics clucth comma and so forth time period time period
Most of the spare elements are with inventory time period If you are fascinated in comma you should truly feel simple to make contact with me time period
Rewards of our firm—HangEPT EPT
one period EPTizing in producing and marketing the farm EPTT more than 15 many years period of time
2 period of time quotEPT quot make in EPTT and France period of time
three period of time quotCE quot amp quotSupplier Assessment Certification quot
four period of time With the stringent quality manage and ideal services for customers time period
5 interval We can supply outstanding and quick after-revenue services period of time
six time period Our purpose colon EPT period
seven period of time We can design and create EPTTs in accordance to consumer aposs demands time period
eight time period We deveXiHu (West EPT) Dis.Hu (West EPT) Dis.ed dozens of Japanese tractors elements comma we can produce the areas with EPTT together period
Welcome to send us your inquiry interval We will deliver you the detail record with pictures period
Welcome to go to our factory excl
| Japanese tractor spare components in Inventory | |
| tractor rim | EPTs |
| kit coupling | bearing |
| steering wheel | tractor website link hitch |
| PTO shaft | tractor sealing KB-TX |
| tractor blades | lamps |
| tractor hitch YM F14 solF15 | hyperlink hitch |
| tyre | sealing |
| gasket | mild |
| air filter | tractor hub |
| filter factor | brake shoes |
| air strainer component | calande |
| air filter cartridge | hitch |
| cardan | tractor ignition key |
| tractor water pipe | klaxon |
| disc clutch KB-TX | mass tractor |
| counter | battery cap |
| clutch | ratchet wheel |
| tractor bulb | oil pressor |
| tractor gentle | radiator cap |
| exhaust EPTor | tractor regulator |
| Tractor keys | stickers |
| gasket | gentle |
| tractor blades | lamps |
Best sales made in China – replacement parts – PTO shaft manufacturer & factory High freelander 2 propshaft Quality Agricultural Equipment Dq854 85HP 4WD China Four Wheel Farming Tractor with Canopy with ce certificate top quality low price
We – EPG Group the greatest agricultural gearbox and pto manufacturing facility in China with 5 various branches. For a lot more information: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828
pto bolts Our pto generate shaft for bush hog organization alter pto shaft duration is generate shaft connects to positioned discovery 2 propshaft in 1999 chevy silverado 1500 push shaft XiHu ford figo push shaft value HangZhou pto push shaft basic safety go over Zhejiang bush hog pto shaft components Province. pto shaft finish T The firm covering 88,000 sq. meters, has innovative products and powerful technological strength, this sort of as the numerical manage equipment resources and machining centers, CAD/CAM system, industrial robotic and so forth. Large top quality Agricultural equipment DQ854 85HP Four wheel drive China 4 wheel Farming tractor with Cover
Tractor Principal Features and Benefits:
1.Outfitted famous brand name motor displaying innovative ability,lower fuel intake,high economic performance.
2. Streamlined look design, stunning and generous.
3.Transmission Case undertake meshed shift and add the gearbox interlock unit helps make the procedure far more easily,dependable and easier.
four. Double action clutch with disc spring, execute steadily and effortless to operate.
five. Entirely hydraulic steering method greatly lowered driver’s perform strength.
6. Soaked disc brake device, dependable brake performance.
7. Individual injection of hydraulic oil, dependable to operate.
8. The lifter with force and place adjustment, with reliable raise.
nine. Tractor PTO:
PTO in Double speed : 540/760r/min Optional, For high doing work performance.
PTO shaft of 6 or 8 spline Optional, adaptable for agricultural tools of all more than the planet.
10. Massive Chassis and Heavy-obligation Rear axle for Durable Robust device.
11. Entire collection light-weight, ROPS,Sunshade/Canopy, Fan/Heater/Air-conditioned cabin are all accessible, for much more cozy driving setting.
Tractor Major specificaiton and Complex parameters:
| Tractor Model | DQ854 | ||
| Drive type | 4WD | ||
| Motor | |||
| Engine model | EPT or Yuchai model, 4 cylinder EPT motor | ||
| Capacity of fuel tank(L) | 150 | ||
| Engine power(kw/hp) | 62.5kw/85HP | ||
| PTO power at rated speed (kw) | 53 | ||
| Transmission | |||
| Clutch | Dry,twin-stage type | ||
| PTO Speed(rpm) | 540/1000 or 760/one thousand | ||
| Gearshift | 8F+4R(widespread) /16F+8R(optional)/8F+8R(optional) | ||
| Hydraulic system | |||
| Hydraulic output valve | 2-Group (optional) | ||
| Three point linkage | |||
| Category of 3-point link | Category II | ||
| Lifting force (at point of 610mm)KN | >16 | ||
| Technical parameter | |||
| Dimension LxWxH (mm) | 4593x2050x2810 | ||
| Wheel base(mm) | 2195 | ||
| Track base(mm) front wheel | 1610 | ||
| Track base(mm) rear wheel | 1620-2571(usual 1620) | ||
| The smallest clearance(mm) | 379 | ||
| Front tyre | 11.2-24 | ||
| Rear tyre | 16.9-34(widespread) / 18.4-thirty(optional) | ||
| Optional Configurations | |||
| Common cabin with Fan Heater cabin AC cabin ROPS Canopy (Sunshade) 8F+8R shuttle gearshift, 16F+4R creeper gearshift, 2-Group Hydraulic output valve Front ballastRear ballast Paddy tire, 18.4-thirty big rear tire, Air brake, Swing draw bar | |||
| Loading Quantity/40HC | 3 Sets in Nude packing for CBU transport | ||
DQ854 85HP 4 wheel drive Tractor detai EPT :
Top-rank technical staff and EPT R&D Middle :
EPT Creation workshop :
Strictly examine for each established device before Items Supply :
Firm Honors and Certificates:
Customized Packing and Transporting Support to meet different customers’ demand :
EPT soon after-sale provider for the two Distributors and Private customers:
Please speak to us if you have any need for our Product :
Greatest price tag will be quoted for you as quickly as receive your Necessity !
Best Cost made in China – replacement parts – PTO shaft manufacturer & factory Peru chelsea pto kit Hot Sale High Quality Dq1504 150HP 4WD Four Wheel Agricultural Farm Tractor with ce certificate top quality low price
We – EPG Team the greatest agricultural gearbox and pto manufacturing unit in China with 5 various branches. For more particulars: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
toyota rav4 drive shaft pto shaft for bush hog tractor supply EPG discovery 2 entrance propshaft is pto adapter plate specialized ebay pto shaft in weasler pto drive shaft design and style, pto shaft adaptor producer 2011 jeep grand cherokee rear travel shaft and huge one thousand to 540 pto adapter sales tsc pto shaft of agricultural equipment and farm implements, which has an unbiased import and export legal rights. EPG Machinery is located in XiHu Spot HangZhou Zhejiang ,China. It is 30km from our manufacturing facility to HangZhou international airport. Peru hot sale Higher high quality DQ1504 150HP 4 wheel drive 4 wheel Agricultural Farm Tractor
Tractor Primary Characteristics and Benefits:
one.Equipped popular model engine demonstrating advanced ability,minimal gas use,higher financial performance.
two. Streamlined physical appearance style, stunning and generous.
three.Transmission Circumstance adopt meshed shift and include the gearbox interlock system helps make the procedure more smoothly,reliable and easier.
4. Double motion clutch with disc spring, perform steadily and effortless to function.
5. Completely hydraulic steering program greatly reduced driver’s work energy.
six. Damp disc brake system, reliable brake efficiency.
7. Different injection of hydraulic oil, reliable to operate.
eight. The lifter with power and situation adjustment, with trustworthy elevate.
nine. Tractor PTO:
PTO in Double pace : 540/760r/min Optional, For high doing work effectiveness.
PTO shaft of 6 or 8 spline Optional, adaptable for agricultural tools of all more than the world.
ten. Large Chassis and Large-obligation Rear axle for Durable Sturdy equipment.
eleven. Entire collection light, ROPS,Sunshade/Canopy, Enthusiast/Heater/Air-conditioned cabin are all available, for far more comfy driving atmosphere.
Tractor Principal specificaiton and Specialized parameters:
| Product | DQ1504 |
| Drive sort | 4×4, 4wd wheel type |
| Motor | |
| Engine manufacturer and product | EPT model, EPT motor Product LR6M3Z-23 |
| Sort | In-line, immediate injection,Drinking water cooling, 4 stroke,6-cylinder |
| Aspiration way | Turbo |
| Motor energy at rated pace | a hundred and ten.3kw/150HP |
| Rated Electricity of PTO | ninety four KW |
| Max. traction Force (KN) | 32.five |
| Displacement(L) | 7.thirteen |
| Compression ratio | 18:one |
| Rated speed (r/min) | 2300 |
| Least expensive gasoline use (g/kw.h) | ≤210 |
| Cylinder·Bore·Stroke | six-110×125 |
| Gasoline tank capability (L) | 350 |
| Muffler Dimension (Dia.×Length) (mm) | φ600×295×140 |
| Muffler weight (kg) | 7.2 |
| Steering kind | Complete Hydraulic steering |
| Transmission | |
| Clutch | United states of america JpV brand name, 13 inch twin-phase Clutch |
| PTO Velocity (rpm) | 540/a thousand |
| Gearshift | 16F+8R |
| Velocity range (km/h) | F: 1.37-32.93 / R:2.09-30.sixty three |
| Driving brake | Moist, disk, hydro-static run |
| Gearbox | 4×2×(2+1) |
| Gearbox shifting way | Joggle cover |
| Walking system | |
| Frame type | Frameless |
| Tyre measurement( entrance/rear) | fourteen.9-26/18.4-38 |
| Force( entrance/rear) (kPa) | 157-196/one hundred fifty-two hundred |
| Rim materials | 330CL |
| Doing work device | |
| Lifter sort | Semi-detached product |
| Max. Lifting pressure (KN) | 27 |
| Suspension design | Rear, 3-position linkages |
| Suspension group | Category II or III |
| Changing manage | Position control, float handle |
| Hydraulic pump type | Equipment pump CBN-E325L |
| Hydraulic output valve | three Groups |
| P.T.O. variety | 1 kind, rear |
| Spline no. of P.T.O. | 6( stHangZhourd), 8, 21 |
| Diameter of spline | 35 |
| RPM | 540/one thousand or 760/one thousand |
| Technical parameter | |
| General Dimension (LxWxH) (mm) | 5240×2345×2995 |
| Wheel base (mm) | 2530/2657 |
| Monitor base-Front /R(mm) | 1650-2285 (1950 ex-operate) /1620-2420 (1850 ex-operate) |
| Observe foundation adjusting way | Restricted/unlimited |
| Minimal floor clearance (mm) | 520 |
| Min. operational fat (kg) | 4755 |
| Front /Rear axle weight (kg) | 2050/2705 |
| Front Ballast | 440kg (eleven pcs, 40kg/pcs) |
| Rear Ballast | 520kg (2 lays each and every facet) |
| Masking | Air-conditioning Cabin or Sunshade (Canopy) |
| Structure excess weight (kg) | 5400(without having cabin)/5780 (with cabin) |
EPT Manufacutring Line:
Strictly Inspecting and Total Screening for making certain substantial good quality product:
Tractor Packing and Loading container for Providing items :
Numerous Transportation modes and Shipping phrase to fulfill various buyers demand :
Best price will be quoted for you as quickly as receive your Necessity !
Best sales made in China – replacement parts – PTO shaft manufacturer & factory Pto pto shaft kubota Shaft Yoke for Agricultural Tractor with ce certificate top quality low price
We – EPG Team the biggest agricultural gearbox and pto manufacturing facility in China with 5 various branches. For a lot more information: Cell/whatsapp/telegram/Kakao us at: 0086-13083988828
john deere pto shaft cap EPG best push shaft Machinery broken pto shaft is 1967 mustang driveshaft situated pto shaft series in pto replacement components XiHu pto coupling components Spot carbon fiber driveshaft drag racing HangZhou sequence fourteen pto shaft Zhejiang what collection pto shaft do i require ,China. It is 30km from our manufacturing unit to HangZhou intercontinental airport. We warmly welcome the buddies from all the entire world!
PTO shaft yoke for Agricultural tractors
1&periodHigh top quality
two&periodCNC equipment with strick tolerance
three&periodProfessional shaft maker
four&periodAcid resistant
| Making use of | Auto portion&comma equipment&comma transmission program&comma steering method |
| Structure | Shaft with common joints |
| Components | Metal&comma stainless steel&comma alloy metal |
| Therapy | drill&comma mill&comma wire-electrode cutting&comma weld&comma warmth treatment |
| Surface | Coated or natural |
| organization sphere | all kinds drive shafts&comma steering shaft&comma universal joints can be custom made produced |
Features&colon
1&time period We have been specialized in planning&comma producing generate shaft&comma steering coupler shaft&comma universal joints&comma which have exported to the United states of america&comma Europe&comma Australia and so on for years
2&period Software to all sorts of basic mechanical scenario
3&period Our products are of substantial depth and rigidity&interval
4&period Warmth resist EPT & Acid resistant
5&period OEM orders are welcomed
one&period Electricity or torque relevant to alternating load you call for&period
| Electricity-ranking measurement |
540 r&periodp&periodm&time period | one thousand r&periodp&periodm&time period | ||
| torque &lsqbNm&rbrack | electricity &lsqbCV&rbrack | torque &lsqbNm&rbrack | electrical power &lsqbCV&rbrack | |
| series one | 210 | sixteen | a hundred and seventy | 24 |
| sequence two | 280 | 21 | 230 | 32 |
| series 3 | four hundred | thirty | 320 | forty five |
| series four | 460 | 35 | 380 | 53 |
| series 5 | 620 | forty seven | 500 | 70 |
| collection six | 830 | 64 | 690 | 98 |
| sequence seven | 980 | 75 | 800 | 113 |
| sequence eight | 1240 | 95 | one thousand | a hundred and forty |
two&periodCross journal&lparUniversal joint&rpar measurement which decides torque of a PTO Shaft&colon
| Cross journal dimension | Ref&period of time | A mm | B mm |
| Series 1 | 1&period01&period01 | 54 | 22 |
| Collection 2 | 2&period01&period01 | 61&period3 | 23&period8 |
| Sequence three | three&period01&period01 | 70 | 27 |
| Sequence four | four&period01&period01 | seventy four&period6 | 27 |
| Sequence 5 | five&period01&period01 | eighty | thirty&period2 |
| Series six | 6&period01&period01 | ninety two | 30&period2 |
| Series 7N | 7N&period01&period01 | 94 | 35 |
| Collection 7 | 7&period01&period01 | 106&period5 | thirty&period2 |
| Series eight | 8&period01&period01 | 106&period5 | 35 |
3 Shut general length &lparor cross to cross&rpar of a PTO shaft&period
four Tubes or Pipes
We’ve previously got Triangular profile tube and Lemon profile tube for all the collection we provide&time period
And we have some star tube&comma splined tube and other profile tubes necessary by our clients &lparfor a certain sequence&rpar&interval &lparPlease notice that our catalog doesnt incorporate all the things we create&rpar
If you w EPT tubes other than triangular or lemon&comma please provide drawings or pictures&period
5 Conclude yokes
We have received many varieties of rapid launch yokes and plain bore yoke&time period I will suggest the usual kind for your reference&period of time
You can also deliver drawings or photos to us if you cannot discover your product in our catalog&period of time
6 Protection devices or clutches
I will attach the detai EPT of security gadgets for your reference&interval We have previously have Free wheel &lparRA&rpar&comma Ratchet torque limiter&lparSA&rpar&comma Shear bolt torque limiter&lparSB&rpar&comma 3types of friction torque limiter &lparFF&commaFFS&commaFCS&rpar and overrunning couplers&lparadapters&rpar &lparFAS&rpar&time period
7 For any other a lot more EPT demands with plastic guard&comma connection method&comma coloration of portray&comma bundle&comma and many others&interval&comma you should come to feel free of charge to enable me know&time period